whats next?
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 
Originally Posted by Rufus
damn you already set to put it back together?
Maybe Les would want to come by and help out? Maybe you remember how we got that on there? Its a biyatch to get off.
I also need an oil pan :cough: Dallis :cough:. Ill see what I can do about plugging up the hole for now. Ill bring it to autozone, and see what they recommend. That way if you want to switch pans, that would be sweet. Youd be set to go when your ready for boost. There should be a fitting or something that will close it up nicely.
yesterday Lizzie ran over my front bumper and head bolts.
The bumper is half as tall as it used to be/scratched up. It fits though. Im not sure about reusing the bolts now either. They wre all laying together, and got ran over perfectly. Completely under the tires. Should I replace em? I dont want to risk that they are slightly bent and I cant see it.
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 You could also run a line (which I would buy of course) from an oil feed to the oil return fitting. That way you will have the oil basically ready to be hooked up, and that hole will be taken car of til your ready to use it.
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 nice, thanks! How much is an oil pan new? I may just pick one up so I can get it all together quick. I have to fill the sh** in my a/c back up too. I took the wrong bolt off and it all sprayed out about a month or so ago. So I gots to get that taken care of.
Unless you want to trade.
Unless you want to trade.
JDM-Jonathan David Martin- I own everybody
iTrader: (22)
Joined: Dec 2003
Posts: 1,991
Likes: 0
From: Glendale, AZ
Rep Power: 0
Originally Posted by Rufus
Did my tranny in 2 days Woot!
Good to hear Dallis, no more tranny fluid spillage! I have to take my car in now because it acts funny when taking off in first gear, kinda does a "hard" shake before it goes. I just got my tranny rebuilt and a new clutch 6,000 mi. ago
I hate stupid ****. 
Originally Posted by n20hcvc
Good to hear Dallis, no more tranny fluid spillage! I have to take my car in now because it acts funny when taking off in first gear, kinda does a "hard" shake before it goes. I just got my tranny rebuilt and a new clutch 6,000 mi. ago I hate stupid ****.
I hate stupid ****.
Originally Posted by n20hcvc
Good to hear Dallis, no more tranny fluid spillage! I have to take my car in now because it acts funny when taking off in first gear, kinda does a "hard" shake before it goes. I just got my tranny rebuilt and a new clutch 6,000 mi. ago I hate stupid ****.
I hate stupid ****.Peace
Subarus FTW I do NOT miss my civic
iTrader: (9)
Joined: Jul 2004
Posts: 4,595
Likes: 0
From: Scottsdale, AZ
Rep Power: 0 whats next is a new tranny. Than intake and DP.
The intake alone adds 14 ft/lb on my car, and 12 hp. The DP will add more than that I believe. Thats the biggest restriction. I should be around 300 hp after X-Mas. Cant afford the mods at this time. presents and decorations and whatnot. And my candle addiction, lol.
The intake alone adds 14 ft/lb on my car, and 12 hp. The DP will add more than that I believe. Thats the biggest restriction. I should be around 300 hp after X-Mas. Cant afford the mods at this time. presents and decorations and whatnot. And my candle addiction, lol.
http://ackakaka.ytmnd.com
iTrader: (7)
Joined: Dec 2002
Posts: 819
Likes: 0
From: Oklahoma City
Rep Power: 0
Originally Posted by n20hcvc
Good to hear Dallis, no more tranny fluid spillage! I have to take my car in now because it acts funny when taking off in first gear, kinda does a "hard" shake before it goes. I just got my tranny rebuilt and a new clutch 6,000 mi. ago I hate stupid ****.
I hate stupid ****. JDM-Jonathan David Martin- I own everybody
iTrader: (22)
Joined: Dec 2003
Posts: 1,991
Likes: 0
From: Glendale, AZ
Rep Power: 0
Originally Posted by JoeyOKC
you mean when it was at Arrowhead Honda? If so, it wasn't rebuilt. All they did was replace the bearings.
Joined: Jan 2003
Posts: 9,137
Likes: 1
From: Ontario
Rep Power: 379 
Originally Posted by n20hcvc
Wrong, you are my friend. They replaced the bearings, put in a new clutch and cleaned it all out. Purrty much.
JDM-Jonathan David Martin- I own everybody
iTrader: (22)
Joined: Dec 2003
Posts: 1,991
Likes: 0
From: Glendale, AZ
Rep Power: 0
Originally Posted by Rufus
Thats not a rebuild homie.
well what I was trying to say was they did more than just replace bearings, Joey said thats all they did. Understand now?
http://ackakaka.ytmnd.com
iTrader: (7)
Joined: Dec 2002
Posts: 819
Likes: 0
From: Oklahoma City
Rep Power: 0 as far as your tranny goes, that is all they did. i wouldn't even go as far as saying it was "cleaned out". it was disassembled...your case never saw a parts washer though.
JDM-Jonathan David Martin- I own everybody
iTrader: (22)
Joined: Dec 2003
Posts: 1,991
Likes: 0
From: Glendale, AZ
Rep Power: 0 Installed my Neuspeed X-brace for the front, installing my rear tie bar on friday of next week. I love corners already, now I just need better tires to stay down on the ground. peace naccas
Civicforums Junkie
iTrader: (55)
Joined: Oct 2002
Posts: 16,087
Likes: 0
From: ARIZONA
Rep Power: 448 im thinking about getting one of these...
http://www.optionsauto.com/prodinfo....ber=CA-6902190
http://www.optionsauto.com/prodinfo....ber=CA-6902190
