d17a2 turbo build
#1
Registered!!
Thread Starter
Join Date: Dec 2013
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 d17a2 turbo build
Hey everyone.
***I copied this from 7thgenhonda.com because that forum is kinda dead, so forgive me if pics or links don't work.***
Check out my build there: http://www.7thgenhonda.com/forum/showthread.php?t=31433
I just started piecing parts together for my boosted d17 build. This is my side project while going to college so its going to take a while and im hoping to be done in the 5 years that ill be at school. Before anyone says this is a waste of money blah blah blah - I don't care. im not on any budget and id rather boost my car then k swap it. Just wanted to start a build thread to keep track of everything I do. Im starting with a bare block in June 2013 and my goal is to have a fully built and boosted d17 by 2018 while going to college full time. so here it is...
Parts/Machine Work/Prices:
bare d17 block $60
bare a2 head $50
oil pan $50
valve cover $30
crower stage 2 turbo cam $120
crower spring/retainer kit $150
supertech black nitride coated valves $250
crankshaft $120
dezod turbo kit + extras $1850
---turbo
---dezod manifold
---2.5 inch down pipe
---2.5 inch straight pipe exhaust
---2 dump tubes
---vacuum block
---intercooler and piping
---deatschwerks 525cc injectors
---tial wastegate
---hoses, couplers, and clamps
engine stand $30
koyo aluminum rad $110
custom turbo manifold ~$400
KMS intake manifold (Not sure if using) $200
Plans:
.5mm bore
wiseco pistons .5mm over
k1 or crower rods
port/polish head
supertech valves .5mm over
crower valvetrain
crower stage 2 turbo cam
dezod turbo manifold and exhaust parts
garrett gt3071 turbo
tial wastgate
tial blow off valve
intercooler and piping will most likely have to be custom
hondata
abs delete
ps delete
ac delete (unless I don't have to)
Original Post 06/29/13:
Here is a pic of my car to get things started
Block
Block
Block
Head
Head
Valve cover
Oil Pan
Oil pan
Crankshaft
Crankshaft
Crankshaft
Crankshaft
Update 11/4/13:
HFP Style Lip
OEM HFP Side Skirts
Update 11/22/13:
Turbo/Manifold/Downpipe/Tial Wastegate
Turbo
Tial Wastegate
Intercooler and Piping
Deatschwerks 525cc Injectors
2.5 inch Straight Pipe
2 Dump Tubes
Red Valve Cover
Hot Tanked Block
Hot Tanked Head
Winter Wheels
Engine Stand
Update 12/3/13:
Crower Stage 2 Turbo Camshaft
HFP Style Lip and OEM HFP Sides getting painted
Installing Lip and Sides
Custom CF Radiator Cover
Fitting the XXR527s with 8mm Spacers (17x9.75 +25) (F:205/40 & R:215/40)
*** (Spotted: 4 Door!)
Random Shots
Update 12/3/13:
Popular Page on IG
@vtec_society's post on IG
Update 1/24/14:
Bride Gias v1
Bride Gias v1 & Shift Boot
Bride Gias v1
Koyo Rad
Koyo Rad
Speedfoos' Old Mani
Speedfoos' Old Mani
Put away for the rest of winter
Update 3/24/14:
Head & Parts
Valve Spring Seats
Cleaned up
Fuel rail with -6an fitting for return
Royal Mahogany w/ Blue Flake
Clear Dc5 Side Markers -Photo creds to my sister..
Side Markers Installed
5 Lug Hubs
Moog Ball Joints
Hawk Brake Pads
Brembo Rotors
NHBP04VIC
Billkisme
***I copied this from 7thgenhonda.com because that forum is kinda dead, so forgive me if pics or links don't work.***
Check out my build there: http://www.7thgenhonda.com/forum/showthread.php?t=31433
I just started piecing parts together for my boosted d17 build. This is my side project while going to college so its going to take a while and im hoping to be done in the 5 years that ill be at school. Before anyone says this is a waste of money blah blah blah - I don't care. im not on any budget and id rather boost my car then k swap it. Just wanted to start a build thread to keep track of everything I do. Im starting with a bare block in June 2013 and my goal is to have a fully built and boosted d17 by 2018 while going to college full time. so here it is...
Parts/Machine Work/Prices:
bare d17 block $60
bare a2 head $50
oil pan $50
valve cover $30
crower stage 2 turbo cam $120
crower spring/retainer kit $150
supertech black nitride coated valves $250
crankshaft $120
dezod turbo kit + extras $1850
---turbo
---dezod manifold
---2.5 inch down pipe
---2.5 inch straight pipe exhaust
---2 dump tubes
---vacuum block
---intercooler and piping
---deatschwerks 525cc injectors
---tial wastegate
---hoses, couplers, and clamps
engine stand $30
koyo aluminum rad $110
custom turbo manifold ~$400
KMS intake manifold (Not sure if using) $200
Plans:
.5mm bore
wiseco pistons .5mm over
k1 or crower rods
port/polish head
supertech valves .5mm over
crower valvetrain
crower stage 2 turbo cam
dezod turbo manifold and exhaust parts
garrett gt3071 turbo
tial wastgate
tial blow off valve
intercooler and piping will most likely have to be custom
hondata
abs delete
ps delete
ac delete (unless I don't have to)
Original Post 06/29/13:
Here is a pic of my car to get things started
Block
Block
Block
Head
Head
Valve cover
Oil Pan
Oil pan
Crankshaft
Crankshaft
Crankshaft
Crankshaft
Update 11/4/13:
HFP Style Lip
OEM HFP Side Skirts
Update 11/22/13:
Turbo/Manifold/Downpipe/Tial Wastegate
Turbo
Tial Wastegate
Intercooler and Piping
Deatschwerks 525cc Injectors
2.5 inch Straight Pipe
2 Dump Tubes
Red Valve Cover
Hot Tanked Block
Hot Tanked Head
Winter Wheels
Engine Stand
Update 12/3/13:
Crower Stage 2 Turbo Camshaft
HFP Style Lip and OEM HFP Sides getting painted
Installing Lip and Sides
Custom CF Radiator Cover
Fitting the XXR527s with 8mm Spacers (17x9.75 +25) (F:205/40 & R:215/40)
*** (Spotted: 4 Door!)
Random Shots
Update 12/3/13:
Popular Page on IG
@vtec_society's post on IG
Update 1/24/14:
Bride Gias v1
Bride Gias v1 & Shift Boot
Bride Gias v1
Koyo Rad
Koyo Rad
Speedfoos' Old Mani
Speedfoos' Old Mani
Put away for the rest of winter
Update 3/24/14:
Head & Parts
Valve Spring Seats
Cleaned up
Fuel rail with -6an fitting for return
Royal Mahogany w/ Blue Flake
Clear Dc5 Side Markers -Photo creds to my sister..
Side Markers Installed
5 Lug Hubs
Moog Ball Joints
Hawk Brake Pads
Brembo Rotors
NHBP04VIC
Billkisme
#3
Administrator
Hey! Look At Me!! I'm a Supporting Member!!
Administrator
iTrader: (22)
Join Date: Aug 2003
Location: Las Vegas, NV
Age: 39
Posts: 21,450
Received 1,144 Likes
on
799 Posts
Rep Power: 485 Re: d17a2 turbo build
7gh is kinda dead? That makes me kinda laugh. That Orin was product of a schism following the sale of the original 7thgencvic.com. I was kind of a part of that schism, but managed to meander my way back here.
Definitely post pics of your progress. Looks like you've done your homework, and looks like you're in for a great build.
Definitely post pics of your progress. Looks like you've done your homework, and looks like you're in for a great build.
#5
Registered!!
Thread Starter
Join Date: Dec 2013
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Re: d17a2 turbo build
7gh is kinda dead? That makes me kinda laugh. That Orin was product of a schism following the sale of the original 7thgencvic.com. I was kind of a part of that schism, but managed to meander my way back here.
Definitely post pics of your progress. Looks like you've done your homework, and looks like you're in for a great build.
Definitely post pics of your progress. Looks like you've done your homework, and looks like you're in for a great build.
Nice nails bro. Lol
I see you on the 7gen fb page all the time, never saw your build.
Looks good
That rad cover from billkisme's CF easy bake oven?
I see you on the 7gen fb page all the time, never saw your build.
Looks good
That rad cover from billkisme's CF easy bake oven?
that rad cover is from billys oven haha its the first one ever made
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Dave Brabant
6th Generation Civic 1996 - 2000
20
10-06-2015 12:44 AM
Touge
Canada East
0
09-22-2015 11:55 PM
Touge
Ottawa
0
09-22-2015 11:52 PM
Touge
Canada East
0
09-22-2015 11:52 PM