Guess how much I've spent...
Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 










Guess how much I've spent...
In the last 6 months.
I couldn't tell you how much I've spent altogether but I do have a shopping list I put together from the past 6 months.
ARC Shift **** 114.00
Pioneer AVIC D3 1,000.00
Paint/Body Work 1,500.00
Engine Build 500.00
New Injectors 375.00
Optima Ylw Top 200.00
Transmission 350.00
Rear Disc Parts 250.00
ITR Steering Wheel 375.00
Used Shortblock 135.00
Alternator 150.00
OEM Sides/Rear Lip 550.00
Exhaust Labor 650.00
Muffler/Resonator 200.00
Tranny Seals/Brgs 101.65
Rear Seat Labor 650.00
Brake Rotors 85.00
Ball joints/Tie Rod Ends/Endlinks/Brake Pads
396.24
SS Brake Lines 110.00
LSD 1,150.00
Pistons 450.00
Koni’s/GC’s 850.00
Sparco Carpet 420.00
Sparco Torino 2’s 1,400.00
Btry Box 120.00
Btry Disc Switch 38.99
Front LCA Bshgs 47.99
Btry Terminal Cvrs 6.99
Btry Cbl Lugs 14.99
2" U-Bend 13.99
CF Hood/Lip 700.00
Total = $12,904.84
I'm sure there is more if I really spent some time thinking about it, but yeah, that's 6 months!
I couldn't tell you how much I've spent altogether but I do have a shopping list I put together from the past 6 months.
ARC Shift **** 114.00
Pioneer AVIC D3 1,000.00
Paint/Body Work 1,500.00
Engine Build 500.00
New Injectors 375.00
Optima Ylw Top 200.00
Transmission 350.00
Rear Disc Parts 250.00
ITR Steering Wheel 375.00
Used Shortblock 135.00
Alternator 150.00
OEM Sides/Rear Lip 550.00
Exhaust Labor 650.00
Muffler/Resonator 200.00
Tranny Seals/Brgs 101.65
Rear Seat Labor 650.00
Brake Rotors 85.00
Ball joints/Tie Rod Ends/Endlinks/Brake Pads
396.24
SS Brake Lines 110.00
LSD 1,150.00
Pistons 450.00
Koni’s/GC’s 850.00
Sparco Carpet 420.00
Sparco Torino 2’s 1,400.00
Btry Box 120.00
Btry Disc Switch 38.99
Front LCA Bshgs 47.99
Btry Terminal Cvrs 6.99
Btry Cbl Lugs 14.99
2" U-Bend 13.99
CF Hood/Lip 700.00
Total = $12,904.84
I'm sure there is more if I really spent some time thinking about it, but yeah, that's 6 months!
Last edited by andyman97; Feb 28, 2008 at 06:32 PM.
Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 










Re: Guess how much I've spent...
I've been saving. 500 for engine build. New water pump oil pump seals belts gaskets and other misc parts. it isn't free lol. Total spent in 6 years would be well over 25k I'm sure. Purchase price was 12.5k.
Registered!!
iTrader: (1)
Joined: Apr 2006
Posts: 825
Likes: 1
From: nova & richmond VA
Rep Power: 276 










Re: Guess how much I've spent...
Dammmmmmmmmm! and I thought I was bad with trying to take on the ultimate N/A 7thgen title lol!
does that include shipping?lol
More power to you man, I hope you blow the competition away at the shows with all that you have put into it
does that include shipping?lol
More power to you man, I hope you blow the competition away at the shows with all that you have put into it
My Pony Princess is the inspiration for my ride.
iTrader: (17)
Joined: Apr 2006
Posts: 5,217
Likes: 0
Rep Power: 0 
Re: Guess how much I've spent...
Yeah, ****'s expensive in a hurry.
But hey, money is for spending and as long as you're having fun then that's all that matters.
But hey, money is for spending and as long as you're having fun then that's all that matters.
New Mod on the Block
iTrader: (35)
Joined: Jul 2004
Posts: 3,473
Likes: 0
From: North Miami Beach, FL
Rep Power: 322 










Re: Guess how much I've spent...
. but you only have one life, and if you dont live it up, why exist at all? Joined: Jul 2002
Posts: 13,151
Likes: 3
From: Washington DC
Rep Power: 425 










Re: Guess how much I've spent...
Jesse sees a:
Dom says:
Not a bad way to spend $10,678.19
Pioneer AVIC D3
Paint/Body Work
Engine Build
New Injectors
Optima Ylw Top
Transmission
Rear Discs
ARC Shift ****
CF Hood/Lip
Btry Box
Btry Switch Kit
Front LCA Bshgs
Btry Terminal Cvr
Btry Lugs
2" U-Bend
Sparco Carpet
Sparco Torino 2’s
SS Brake Lines
LSD
Pistons
Koni’s/GC’s
DC5 Steering Wheel
Ball jnt/Tierod Ends/Endlinks/Hawk Brake Pads
Used Shortblock
Alternator
Paint/Body Work
Engine Build
New Injectors
Optima Ylw Top
Transmission
Rear Discs
ARC Shift ****
CF Hood/Lip
Btry Box
Btry Switch Kit
Front LCA Bshgs
Btry Terminal Cvr
Btry Lugs
2" U-Bend
Sparco Carpet
Sparco Torino 2’s
SS Brake Lines
LSD
Pistons
Koni’s/GC’s
DC5 Steering Wheel
Ball jnt/Tierod Ends/Endlinks/Hawk Brake Pads
Used Shortblock
Alternator
Not a bad way to spend $10,678.19
I Hunt Goats, Rams, And Mustangs.
iTrader: (6)
Joined: May 2005
Posts: 2,360
Likes: 1
From: CenTex
Rep Power: 280 





Re: Guess how much I've spent...
LOL andy.. you still got some time till you catch up to me in total price
im approaching 50K and all i have to show for it is speed
LOL well now a new body
im approaching 50K and all i have to show for it is speed
LOL well now a new body
Thread Starter
Turbo Guru
iTrader: (14)
Joined: Oct 2002
Posts: 4,078
Likes: 0
From: Rockville, MD
Rep Power: 351 










Re: Guess how much I've spent...
Trust me Glen, that isn't everything by a longshot, that's just the past 6 months. I've been through 2 other turbo kits, 4 other engine managements a whole nother body kit, the list goes on and on.
Re: Guess how much I've spent...
you'll have another life after this one, if you believe in the Lord Jesus Christ. Period.
But speaking about the money on the car, jus put a down payment on a mercedez with 10 grand!
But speaking about the money on the car, jus put a down payment on a mercedez with 10 grand!
Re: Guess how much I've spent...
Agreed! haha... I wish I had money like that to spend, then again, all the money I've put into my Civic will be gone... My stepdad bought an Acura TL Type S a few weeks ago, and now his 1yr old '07 Si is sitting around... I'm going to go pick it up this Spring Break and leave my car there... the Si is fully loaded with the HFP package + extras!
Then, I gotta save money up again to start ALL over again... except this time I won't have to spend money on rims, kit, suspension... AND the engine! haha K20 > my non-vtec D17...
Then, I gotta save money up again to start ALL over again... except this time I won't have to spend money on rims, kit, suspension... AND the engine! haha K20 > my non-vtec D17... Re: Guess how much I've spent...
Nope, he lives up in Missouri while I'm in Texas. 12hr drive -_- ... but ya, I wanna try out the paddle shifting. He got his in... Carbon Graphite Pearl? I love the rims that it comes with, too!
But ya, I'm glad I'm getting the Si though, BIG upgrade for me!
But ya, I'm glad I'm getting the Si though, BIG upgrade for me!
Re: Guess how much I've spent...
My Mods also around $10K
Engine
Blitz Sonic Air Filter
Bonnet Insulator
CAI Intake & Heatshield (DIY)
Denso Iridium Spark Plug
Modified Simota Carbon charger
Obit Piggyback
Transmission
Skunk2 Racing Gearknob
VT Short Shifter
Suspension
Alutech Rear Lower Strut Bar
Alutech Rear Strut Bar
Engine Bay Honda OEM strut bar
Front Camber Bolt
Front Tower Neuspeed Strut Bar
Rear Camber Kit (Kenny)
Summit Front Underbrace Bar
Tanabe NF Sustec Pro Coilovers
Type-R DC5 Rear 22mm Anti-roll Bar
Brakes
Brembo OEM 282mm Rotors
Prelude Disc Brakes
Project Miu B-Spec Rear Brake pads
Project Miu Beststop Front Brake Pads + Project Miu 800 Degree Front
Brake Pads
Steel Braided hose
Type R DC5 Master Brake Pump
Type-R EP3 262mm Rear Disc Brakes
Interior
Cairefresh Air-con Filter
Defi-Link VSD X Display
Exterior
Customised Front and Rear Lip
Customised Side Skirts
Dechrome Front and Rear (Painted)
Honda Honeycomb Sports Grill
Supersprint Exhuast
Wheels
Black Racing Rims
Bridgestone Potenza G3 Tyres
Extended Lug Nuts
OEM Brembo 282mm Rotors
USA Megan Racing 4-1 Header
Works Emotion Lug nuts
Alarm
Automate Alarm
Engine
Blitz Sonic Air Filter
Bonnet Insulator
CAI Intake & Heatshield (DIY)
Denso Iridium Spark Plug
Modified Simota Carbon charger
Obit Piggyback
Transmission
Skunk2 Racing Gearknob
VT Short Shifter
Suspension
Alutech Rear Lower Strut Bar
Alutech Rear Strut Bar
Engine Bay Honda OEM strut bar
Front Camber Bolt
Front Tower Neuspeed Strut Bar
Rear Camber Kit (Kenny)
Summit Front Underbrace Bar
Tanabe NF Sustec Pro Coilovers
Type-R DC5 Rear 22mm Anti-roll Bar
Brakes
Brembo OEM 282mm Rotors
Prelude Disc Brakes
Project Miu B-Spec Rear Brake pads
Project Miu Beststop Front Brake Pads + Project Miu 800 Degree Front
Brake Pads
Steel Braided hose
Type R DC5 Master Brake Pump
Type-R EP3 262mm Rear Disc Brakes
Interior
Cairefresh Air-con Filter
Defi-Link VSD X Display
Exterior
Customised Front and Rear Lip
Customised Side Skirts
Dechrome Front and Rear (Painted)
Honda Honeycomb Sports Grill
Supersprint Exhuast
Wheels
Black Racing Rims
Bridgestone Potenza G3 Tyres
Extended Lug Nuts
OEM Brembo 282mm Rotors
USA Megan Racing 4-1 Header
Works Emotion Lug nuts
Alarm
Automate Alarm
I Hunt Goats, Rams, And Mustangs.
iTrader: (6)
Joined: May 2005
Posts: 2,360
Likes: 1
From: CenTex
Rep Power: 280 





Re: Guess how much I've spent...



, and i just bought koni/gc's and it

