Crazy Setup For 00 Si EM1
11-29-2005
#1
K20 Member
Thread Starter
iTrader: (13)
Join Date: Dec 2002
Location: Medford, Oregon
Age: 38
Posts: 2,926
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 
Crazy Setup For 00 Si EM1
Here is my Friends Build... Its going in this weekend.
OK here is the DEAL. THIS IS NOT MY SETUP PLZ DONT PM me and ask about it... This is my Friends Setup into his 2000 Civic SI. He Already has his sTage 3 Axles and Quaife LSD in the car.
Well Full Race Manifold and Turbo.
45mm Tial Wastegate and 50mm TiAL BOV.
Stock Fuel Pump (RIGHT) Aeromotive Fuel Pump (LEFT)
1000CC Injectors
ERL 2.0L Block Sleeved, JE 84mm Pistons, Crower F/I Rods
GSR Crank Shaft Balanced Crower Rods and Bearings
Precision Powdercoated Black Intercooler
Port and Polished B16 Head w/ 3 Angle Valve Job.
Supertech Valves
3in Downpipe on Top of Turbo and Manifold
OK here is the DEAL. THIS IS NOT MY SETUP PLZ DONT PM me and ask about it... This is my Friends Setup into his 2000 Civic SI. He Already has his sTage 3 Axles and Quaife LSD in the car.
Well Full Race Manifold and Turbo.
45mm Tial Wastegate and 50mm TiAL BOV.
Stock Fuel Pump (RIGHT) Aeromotive Fuel Pump (LEFT)
1000CC Injectors
ERL 2.0L Block Sleeved, JE 84mm Pistons, Crower F/I Rods
GSR Crank Shaft Balanced Crower Rods and Bearings
Precision Powdercoated Black Intercooler
Port and Polished B16 Head w/ 3 Angle Valve Job.
Supertech Valves
3in Downpipe on Top of Turbo and Manifold
Last edited by ImportRacer2123; 11-29-2005 at 03:10 AM.
11-29-2005
#12
let the devil out
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (13)
Join Date: Oct 2003
Location: Harker heights Tx
Age: 44
Posts: 10,632
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 363 
its powder coated for that sleeper look, it can interfere in some cases but look at the WRX STI FMIC its the same way
11-29-2005
#14
Jap-Euro Fusion
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (16)
Join Date: Jul 2002
Location: Washington DC
Age: 41
Posts: 13,151
Likes: 0
Received 3 Likes
on
3 Posts
Rep Power: 399
Originally Posted by eye_see_you
its powder coated for that sleeper look, it can interfere in some cases but look at the WRX STI FMIC its the same way
Powdercoating the intercooler was pretty dump, it is going to interfere with the cooling. It should have been ANODIZED if all he wanted to do was change the color.
11-29-2005
#17
K20 Member
Thread Starter
iTrader: (13)
Join Date: Dec 2002
Location: Medford, Oregon
Age: 38
Posts: 2,926
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 hmmm yeah you guys are right about the intercooler.. I think he is going to sell it.. and buy a bigger one... Ill tell him to anodize it.. when he does.
11-29-2005
#18
Tighter than a third eye after 1 week in prison.
iTrader: (4)
Join Date: Sep 2004
Location: NorCal.PittsburgWHAT!
Age: 38
Posts: 4,608
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 285 looks sick. but i've read in a magazine you can paint the intercooler with no problem, they even painted it with automotive spray paint...
11-29-2005
#19
Smuggling bananas and mexicans all for one low price...
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (11)
Join Date: Aug 2003
Location: Langley AFB, VA
Age: 38
Posts: 9,996
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 372 Yeah. I was reading a couple articles on painting it. It interferes but the percentage is SO small in the reduction of cooling that is is unnoticable.
11-29-2005
#20
DONT PANIC
iTrader: (2)
Join Date: Dec 2004
Location: California, Palmdale
Age: 40
Posts: 2,201
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 261 looks like a nice setup.
1 recomendation though...
take the header wrap off the header. It will cause the metal to heat-soak and become brittle. And the vibration from the exhaust pulses will cause it to break.
The full-race manifolds are stainless, they dont need the header wrap anyway. and that is an expensive manifold to have break.
1 recomendation though...
take the header wrap off the header. It will cause the metal to heat-soak and become brittle. And the vibration from the exhaust pulses will cause it to break.
The full-race manifolds are stainless, they dont need the header wrap anyway. and that is an expensive manifold to have break.
11-29-2005
#22
DONT PANIC
iTrader: (2)
Join Date: Dec 2004
Location: California, Palmdale
Age: 40
Posts: 2,201
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 261 my buddy had a similar setup to that in his hatch.
built GSR with a lovefab manifold, 3" downpipe, aeromotive fuel pump, little larger intercooler, turbonetics 60-1.
His best time was a 10.90 @135 on the stock struts with a set of lowering springs.
The car got stolen right after he installed the Strange Suspension. Never got to run it with the good suspension setup.
Im sure your friend will love the setup.
built GSR with a lovefab manifold, 3" downpipe, aeromotive fuel pump, little larger intercooler, turbonetics 60-1.
His best time was a 10.90 @135 on the stock struts with a set of lowering springs.
The car got stolen right after he installed the Strange Suspension. Never got to run it with the good suspension setup.
Im sure your friend will love the setup.
11-29-2005
#23
Registered!!
iTrader: (4)
Join Date: Jul 2004
Location: so cal
Age: 44
Posts: 3,566
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 278 i think a better option for the crank would have been a b16 crank. it would allow for a higher rev with lower mean piston speeds. but it all depends on the rest of the set up as well. nice ride it should be hello fast.
and turbo does your friend work for dynamic autosports??? one of those guys had his vic stolen as well. went to sell it and traded positions with the prospective buyer when the guy jumps in and takes off never to be seen again.
and turbo does your friend work for dynamic autosports??? one of those guys had his vic stolen as well. went to sell it and traded positions with the prospective buyer when the guy jumps in and takes off never to be seen again.
11-29-2005
#27
DONT PANIC
iTrader: (2)
Join Date: Dec 2004
Location: California, Palmdale
Age: 40
Posts: 2,201
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 261 naw, my buddy did his car completely himself. He was at a buddies house, walked outside and it was gone.
They stole it using a flatbed. They found the car on its side in the middle of the desert --- completely stripped.
They stole it using a flatbed. They found the car on its side in the middle of the desert --- completely stripped.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Zygrene
6th Generation Civic 1996 - 2000
1
03-22-2016 12:36 PM
Touge
Canada East
0
09-22-2015 11:55 PM
Touge
Ottawa
0
09-22-2015 11:52 PM
Touge
Canada East
0
09-22-2015 11:52 PM
