Official Suspension Drop Pictures Post
Joined: Jul 2002
Posts: 4,209
Likes: 0
From: 650 (SC_RWC) CA
Rep Power: 332 
Originally Posted by Blk4blk2K1
Skunk2 CO's
Front Wheel
Rear Wheel
Exhaust Pipe ground clearance
Front Wheel
Rear Wheel
Exhaust Pipe ground clearance
so pretty much you hit eveything you drive over.
car looks goo though despite the scratching. I figure you bring it up when you drive?
I Queef > You
iTrader: (11)
Joined: Feb 2002
Posts: 2,348
Likes: 0
From: San Diego, California, US
Rep Power: 0 Neuspeed Sports.
The first two pics are with 195/65/15 tires. I wanted some fat ones b/c the area I live in sucks so theres dips and bumps everywhere.
The third pic is with 205/40/17s. I'll put these rims back on in about two months or so.
The first two pics are with 195/65/15 tires. I wanted some fat ones b/c the area I live in sucks so theres dips and bumps everywhere.
The third pic is with 205/40/17s. I'll put these rims back on in about two months or so.
Registered!!
Joined: May 2004
Posts: 22
Likes: 0
Rep Power: 0 Anyone have a white civic (sedan preferably) dropped with black rims (gloss black preferably) with a polished lip and lowered a little bit? I am too hesitant on buying my rims and my drop, in fear of it will look gay. :-( help me out!
ThE FaMiLy SeDaN
iTrader: (21)
Joined: Jul 2002
Posts: 4,221
Likes: 0
From: UCF, Florida, US
Rep Power: 0 
B&G
3.25" rear/3.25" front 215/35/19 falken 19x8 +45
eibach prokit 1.3 all around
215/35/18 p7000 18x7.5 +43
eibach prokit 1.3 all around
215/35/19 pirelli pzero 19x7.5 +45
eiback prokit 1.3 205/40/17 parada spec 2 (yoko)
225/40 on oem
215/45 on oem
215/35/19 falken 3.35 rear/ 3.4 front
B&G
best setup
19x8 +47 215/35/19
3.5Front 3.25 rear
B&G
riley
p.s. sorry bout so few pics i couldnt find pics of the rest of my wheels.
Lowest NHBP coupe in San Francisco
Joined: Apr 2003
Posts: 880
Likes: 0
From: San Francisco *415*
Rep Power: 0
Originally Posted by JDM EM2
Registered!!
Joined: Sep 2003
Posts: 362
Likes: 0
From: germany
Rep Power: 0 ANYTHING is better than stock shocks and struts..lol
but as far as coilovers i got B&G's but it depends...if you got a 02+ then you can use K&W...both are close to the same price..if you go GC then get aftermarket shocks and stuts the Koni yellows slide RIGHT into the GC's BUT the front strut needs to be cut, drained, and used as a housing for the new Koni strut..
but as far as coilovers i got B&G's but it depends...if you got a 02+ then you can use K&W...both are close to the same price..if you go GC then get aftermarket shocks and stuts the Koni yellows slide RIGHT into the GC's BUT the front strut needs to be cut, drained, and used as a housing for the new Koni strut..
Lowest NHBP coupe in San Francisco
Joined: Apr 2003
Posts: 880
Likes: 0
From: San Francisco *415*
Rep Power: 0
Originally Posted by SlammedBlueEM2
Phil, where are the pics of your car?
Looks like myspace.com is down give me ur email Zell I'll sent u the pic that I took 2day.
Registered!!
Joined: May 2003
Posts: 74
Likes: 0
From: Newark, NJ
Rep Power: 0 Here is my 02 Sedan with Koni Yellows and Eibach springs, Eibach front and rear camber kit...."I DID NOT EVEN LOOSE THE RIDE" does not ride rough at all!!!
See more pics here http://www.7thgencivic.com/memberrid...7/ppuser/12855
See more pics here http://www.7thgencivic.com/memberrid...7/ppuser/12855
Last edited by exvandal70; Jul 8, 2004 at 04:42 AM.
Registered!!
iTrader: (1)
Joined: Jun 2004
Posts: 120
Likes: 0
From: perris, california
Rep Power: 0 does anybody have pics of a white coupe with white wheels, and if its possible, a 2 in drop all the way round. i think thats what i want but i dont know how good it will look. thanks.
You only have Koni on the rears? If you wanted to improve the ride quality, the fronts would've kept most of the ride quality.
Not a bad look, though. Gotta turn my head to the side to see the job you did.
Not a bad look, though. Gotta turn my head to the side to see the job you did.
I Queef > You
iTrader: (11)
Joined: Feb 2002
Posts: 2,348
Likes: 0
From: San Diego, California, US
Rep Power: 0 With my 17's I have about 2 finger gap in the front and 1.5 in the back. I have skinny fingers. And with the 40 series tires you're gonna have more gap. My next set of tires will either be 205/45 or 215/40, just so I can have some more sidewall. It would be perfect if the drop was lower about half an inch. But they ride similar to stock, and I've been on my stock shocks for over 2 years now.
Registered!!
Joined: Sep 2001
Posts: 1,098
Likes: 0
From: San Mateo, California, US
Rep Power: 0 i had pics on the old skool site. Tein Flex for the EP3 on my EM2. I was riding on 3" front and 3.5" rear drop. CHP pulled me over and my headlights were below the 22" mark and got a fix it. i always thought our cars could never be that low because our headlights sit higher than all previous civics. and to think I have full suspension travel all the way around. I guess $1700 can do that for you. I **** off a lot of people esp when you ride their *** around the corners... i get plenty of practice. i have to keep up/roll with a 98 supra on teins, 4 02 stock WRXs, and a stock DA9. lets just say i hate straight aways...
