GC installation help!!

Reply Subscribe

Thread Tools

Search this Thread

Nov 10, 2002

GuSTo

Thread Starter

Registered!!

iTrader: (10)

Joined: May 2002

Posts: 2,723

Likes: 0

From: Thornhill, Ontario, Canada

Rep Power: 0

GuSTo is an unknown quantity at this point

GC installation help!!

I'm trying to install my ground control coils up front and got stuck...

i've already taken out the shock tower and springs....
i'm trying to remove the silver piece that covers the top of the stock shock....can't seem to do it

need help!! any tips???????????!?!?!?!?!

Nov 10, 2002

VNlilMAN

The Standard One

iTrader: (7)

Joined: Sep 2001

Posts: 11,659

Likes: 1

From: City of Angels, California, US

Rep Power: 416

so your trying to remove that middle bolt that holds everything together? you should have loosened it while it was on the car. but since you havnt, your going to need to use an allen key, put that in the top. get some sort of wrench(i used vice grips) and turn then allen key and wrench in the opposite direction. its not easy, i just layed it on the floor, with the allen key resting on the ground and pushing the wrench down toward the allen key.

Nov 11, 2002

ASWZero

Registered!!

Joined: Sep 2001

Posts: 1,098

Likes: 0

From: San Mateo, California, US

Rep Power: 0

ASWZero is an unknown quantity at this point

Quote:

Quote
[hr]Originally posted by: GuSTo

i've already taken out the shock tower and springs....
i'm trying to remove the silver piece that covers the top of the stock shock....can't seem to do it

[hr]

someone missed this part... VNlilman(cough)

He is past that part. He is talking about the place that the bumpstop hit when it bottoms out. The silver cap on the top of the shock body. I thought I replied to this earlier. Oh well.