I think I went to far.......
07-25-2002
#1
Registered!!
Thread Starter
Join Date: Jul 2002
Location: Indianapolis, Indiana, US
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 
I think I went to far.......
I picked my car up today after getting Intrax springs installed. The owner of the local import shop told me to get a killer look go for the 2.0" front drop with the 1.8" rear drop. (I also had camber kits installed) I am wondering if anyone else has these springs. I think I might have gone a little too low. I am currently running 205/55/16 tires and I am thinking about 17's or 18's, but I think I might have gone too low.
Any advise on if I have lowered a little too much?
Thanks
Any advise on if I have lowered a little too much?
Thanks
07-25-2002
#2
Registered!!
iTrader: (4)
Join Date: Jun 2001
Location: Rochester, NY
Age: 42
Posts: 1,187
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Here are mine.. except i have the pro-kit.. which i think is kinda wacked because it's only suppose to be a 1" drop about.. but it's not.. as you can see...
btw those are 205/55/16
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] 2002-02-15@12-27-13.jpg (47 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] P2150069.jpg (46 Kb)
btw those are 205/55/16
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] 2002-02-15@12-27-13.jpg (47 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] P2150069.jpg (46 Kb)
07-25-2002
#3
The Standard One
iTrader: (7)
Join Date: Sep 2001
Location: City of Angels, California, US
Posts: 11,659
Likes: 0
Received 1 Like
on
1 Post
Rep Power: 394 i guess it really depends on your preference... i would love to have that drop cause i think my neuspeed sports are too high. especially with my 18s.... i have a 1 finger gap all around but the car is higher then it was with stock tires so ya it hardly looks dropped... it looks like a stock car with no wheel gap. as for the guy with the prokit... it looks like the back is lower then the front, thats why i dont really recommend eibachs on sedans.
07-25-2002
#5
Registered!!
Thread Starter
Join Date: Jul 2002
Location: Indianapolis, Indiana, US
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 DogstyleEX,
Nice lowering. I like that look. I will post pics of my ride later today. Mine is LOOOOW. I mean, it looks stupid. I am ordering the Neuspeed kit that lowers just 1.5" all around.
Nice lowering. I like that look. I will post pics of my ride later today. Mine is LOOOOW. I mean, it looks stupid. I am ordering the Neuspeed kit that lowers just 1.5" all around.
07-25-2002
#6
Registered!!
Thread Starter
Join Date: Jul 2002
Location: Indianapolis, Indiana, US
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 VNlilMAN,
Want to trade? I realized last night that I don't like the slammed look. I can't get a finger between the wheel well and the tire!
Want to trade? I realized last night that I don't like the slammed look. I can't get a finger between the wheel well and the tire!
08-14-2002
#8
Registered!!
Join Date: May 2001
Location: Juneau, Alaska
Posts: 588
Likes: 0
Received 0 Likes
on
0 Posts
Rep Power: 0 Bulletboy,
Can you tell me what the part # is for the Intrax springs that lower you 2.0 frt/1.8 rear? I went to their website but I only see a part # for springs that lower the car 2.5/2.3 as there is no # next to the 2.0/1.8 springs.
Thank you very much,
Terry
Can you tell me what the part # is for the Intrax springs that lower you 2.0 frt/1.8 rear? I went to their website but I only see a part # for springs that lower the car 2.5/2.3 as there is no # next to the 2.0/1.8 springs.
Thank you very much,
Terry
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Damngoods
Archive - Canada Forsale/Trade eh?
4
04-21-2006 02:42 PM
