01 LX Rear Sway Endlinks....NEEDED!
Joined: Aug 2001
Posts: 10,857
Likes: 0
From: Gaithersburg, MD
Rep Power: 413 
Re: 01 LX Rear Sway Endlinks....NEEDED!
They aren't $200 a pop, they are $12. The trailing arms are $200. Or you can get aftermarket endlinks from Grey or Progress that will work with a stock bar.
Alpha, IM or PM and maybe we can figure this out.
Thread Starter
Registered!!
iTrader: (8)
Joined: Dec 2006
Posts: 3,091
Likes: 0
From: We are Anonymous!
Rep Power: 329 Re: 01 LX Rear Sway Endlinks....NEEDED!
we have it figured out.
The endlinks are not the same.
Due to the fact that the 01 LX does not have the provisioning for them.
I am in contact with Progress to find the parts needed..
The endlinks are not the same.
Due to the fact that the 01 LX does not have the provisioning for them.
I am in contact with Progress to find the parts needed..
Joined: Aug 2001
Posts: 10,857
Likes: 0
From: Gaithersburg, MD
Rep Power: 413 Re: 01 LX Rear Sway Endlinks....NEEDED!
OMG, I told you guys stock endlinks won't work with the ****ing 01LX trailing arm and Green you said in post #27 "where can he find JUST the endlinks". I said this in post #22
"WTF is going on here.
If you want the endlink brackets you need to weld them on or get new LCAs.
You need the progress adapter kit, bushings for the sway bar, and brackets to hold the sway bar to the car. /thread.
All the parts are the same for all 2001-2005 civics (except the bushings)."
Its not that hard (pick one)
1) Either weld on endlink brackets
2) Buy new rear LCAs
3) Get progress adapter kit
The endlinks for all cars with the endlink brackets ARE the same. You can use front on rear and rear on front on any trim.
Understood?
Thread Starter
Registered!!
iTrader: (8)
Joined: Dec 2006
Posts: 3,091
Likes: 0
From: We are Anonymous!
Rep Power: 329 Re: 01 LX Rear Sway Endlinks....NEEDED!
I just got off the phone with Progress Group (714-630-9017).
I told them the situation and the lady stated that I would need the Endlink kit part # 65.1006. I was going to order it from their website for $114.75 but the site is down, she advised me to go through my local dealer.
I think I found the same kit on Dezod.com
http://www.dezod.com/pd_progress_ant...ar_adapter.cfm
Like I said, I have the RSX-S 19mm sway and the Progress subframe brace. Will this kit work for my application and do I need anything else?
I told them the situation and the lady stated that I would need the Endlink kit part # 65.1006. I was going to order it from their website for $114.75 but the site is down, she advised me to go through my local dealer.
I think I found the same kit on Dezod.com
http://www.dezod.com/pd_progress_ant...ar_adapter.cfm
Like I said, I have the RSX-S 19mm sway and the Progress subframe brace. Will this kit work for my application and do I need anything else?
Here is the link to the thread in question.
LINK!
http://www.7thgenhonda.com/forum/showthread.php?t=8114
Joined: Aug 2001
Posts: 10,857
Likes: 0
From: Gaithersburg, MD
Rep Power: 413 Re: 01 LX Rear Sway Endlinks....NEEDED!
You will get those endlinks with the progress adapter kit. You can't use the endlinks without the U brackets of the adapter kit (or EX LCAs or Welded on endlink brackets).
This really isn't that hard...The progress adapter kit comes with
2 sets of U brackets to act as endlink brackets
2 sets of endlinks
2 sets of little nibs to put into your subframe for the brace
This really isn't that hard...The progress adapter kit comes with
2 sets of U brackets to act as endlink brackets
2 sets of endlinks
2 sets of little nibs to put into your subframe for the brace
Joined: Oct 2002
Posts: 4,248
Likes: 2
From: Rockville, Maryland
Rep Power: 331 Re: 01 LX Rear Sway Endlinks....NEEDED!
yea, if you dont get the nutserts, you're screwed, because the upper mounting holes for the sway bar brackets are blind holes, meaning you cant get to the back of them to use a nut.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
juror
Suspension DIY
6
Jul 30, 2019 03:28 AM
redcloud
I.C.E. (Audio) & Electrical Upgrades
9
Sep 7, 2015 01:45 PM
