Rep Power: 812

anyone know what the stock size is, i dont think 1 inch is correct like what this site says. for 01-04 civic

http://nipponpower.com/product.phtml?p=324&mmk=392

 
Rep Power: 412

https://www.civicforums.com/forums/4...ease-read.html

http://www.geocities.com/bellz252/ar...ybarspecs.html

 
Rep Power: 448

The 2001s came with the 25.4mm bar

Ive got the Energy Suspension Polyurethane bushings on my 01 EX Sedan...feels much better than the stock setup

 
Rep Power: 812

bump, i forgot the size, but its clearly printed on the stock bushing. the problem tho is that the stock one is not a normal bushing shape like the rear. it has a different design. so idk if its possible to cut chunks out of the ES bushing to mod it in there or if i should just get new oem bushings to replace the cracked ones.

 
Rep Power: 388

I can check my 01 bar size if that helps you. I still got the OEM bushings- took the bar off, sitting in the attic. Hit me up if you want me to dig em up and grab whatever numbers u need off them.

 
Rep Power: 812

well thats not the problem, i found the size on the side of the bushing. problem is weird shape. its not flat on the bottom is rounded off on each side.

 
Rep Power: 267

maybe its to give it some sideways movement.
but i am not sure, i just dont realy see a problem.Its gets mounted agains a flat side so.
If i allready had my energysuspions ones(04-05 TSX type are 25.4mm) i could tell you if they are flat.
I swapped my 15.4mm to 25.4mm but still with
Oem bushing and yes they are rounded.

 
Rep Power: 812

so the 1 inch i just got did not fit, too loose. the stock one on my 2002 civic ex sedan is something like 0.874 inch or 22mm. anyone know what size i should order? im still trying to get ahold of someone to send these back but idk what else i should get instead.

 
Rep Power: 812

okay so the 03 rsx ES front sway bushings are 23mm which is close enough. anyone know if they have that same shape with the indented top part instead of flat?