Rep Power: 0

Problem fixed, thanks to everyone.

 
Rep Power: 0

The noise is comming fromt he driver side for sure, We gonna try to but those little metal ***** back in today and see whats gonna happen. Ill keep you updated guys, but if anyone can give me some advice please e-mail me

Thanks

 
Rep Power: 0

whats the allan wranch size that you use on the back shock/ the top bolt a 5mm or 6mm. B/c my buddy stipped the screw on top So I wanna make a sure to use the right size on the other shock.

 
Rep Power: 268

Okay, first things first. Did you install the bearing on the drivers side or not? If not, found your problem. If you did, are you sure all of the bearings were put back in? The strut bears on the bearings and should make noises if it is not there or if all the bearings were not put back in.

And the rear allen key is 5mm. THIS DIY is your friend!

And please make sure you index the struts correctly!

 
Rep Power: 0

No the bearing was not put back on the driver side, I guess we found the problem

 
Rep Power: 268

And THIS is your basic installation sequence and orientation.