Rep Power: 0

the problem i have ran into is the part with the bearings..the upper gold ring will not slide into the stock bearing part..( the big peace) ..so i thought maybee i need to remove the bearing ring and put it on the upper gold ring..(cause it fits)..but then they are not sealed and if i hit a large bump the bearing will fall out...so thats were im stuck...at first i did it without the bearing peace and got the crunch binding noise..

thanx in advance! Derek

 
Rep Power: 0

ok...well........i fixed it!! just in case anybody was wandering what happed...the bearing holder has a little black ring attached to the large upper spring perch that was not coming off ... so when i pulled the bearing ring off all the bearings where falling all over the place....(I know stupid me) but that was the problem. I want to give mad thanx to Freddie at Ground Control for helping me with this...they have great customer service!!!