RSX: Type s or Type r Sway bars
Joined: Aug 2001
Posts: 10,857
Likes: 0
From: Gaithersburg, MD
Rep Power: 412 
You need the bushings that come with the bar. The 13mm ones on the stock bar won't fit. They are exactly the same to install. Pick one and install it.
Autocross Junky
Hey! Look At Me!! I'm a Supporting Member!!
Joined: Oct 2002
Posts: 7,211
Likes: 0
From: Las Vegas, Nevada, US
Rep Power: 380 There is no "Better" its a matter of Tuning and what you need.
Increasing the strength of the rear anti-roll bar will decrease understeer & increase oversteer, as well as make the car Less forgiving to bad driving and make it more unstable in less then perfect conditions. (meaning the largest strongest bar is not allways the best choice... especially for street driving) Tune accordingly.
Increasing the strength of the rear anti-roll bar will decrease understeer & increase oversteer, as well as make the car Less forgiving to bad driving and make it more unstable in less then perfect conditions. (meaning the largest strongest bar is not allways the best choice... especially for street driving) Tune accordingly.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
