RSX sway bar instal
Thread Starter
Registered!!
iTrader: (3)
Joined: Dec 2003
Posts: 714
Likes: 0
From: so-cal
Rep Power: 0 
RSX sway bar instal
I upgraded the EX sway bar to a RSX rear this weekend. How long has this job taken anyone else who has done it? It took me and my friend about 8 minutes to have the old one off and about another 8 minutes to put the new one on. Mine came from a type S. Has anybody had a stock endlink fail after this swap? Other then that I would just like to say that the car handels so much better now! The only thing is that I was really used to all the understeer and now its all gone. Makes mid-corner throttle lift a lot more interesting.
Thread Starter
Registered!!
iTrader: (3)
Joined: Dec 2003
Posts: 714
Likes: 0
From: so-cal
Rep Power: 0 That sucks. Just cause I'm curious, how many miles on your car before the progress went on?
I keep being amazed at the stuff this sway bar will let me get away with. It feels so weird to have a controlable drift in a front drive car, without using the handbrake. I wish all mods worked this good.
I keep being amazed at the stuff this sway bar will let me get away with. It feels so weird to have a controlable drift in a front drive car, without using the handbrake. I wish all mods worked this good.
Ricerus Maximus
iTrader: (5)
Joined: Jun 2001
Posts: 2,926
Likes: 0
From: Statesboro, Georgia, US
Rep Power: 332 can someone with an 01 sedan talk about their install and how long it took? I know you have to drill some holes so any info would be helpful, I might be getting a free RSX-S bar, and will need some info.
I have something to add. I am getting a Type s sway bar from my friend he just ordered a full suspension setup and he is giving me all of his stock stuff for free
The question I have is will the RSX endlinks work on my 02 ex coupe? SO I dont have to worry about upgrading. Thanks
The question I have is will the RSX endlinks work on my 02 ex coupe? SO I dont have to worry about upgrading. Thanks 
Autocross Junky
Hey! Look At Me!! I'm a Supporting Member!!
Joined: Oct 2002
Posts: 7,211
Likes: 0
From: Las Vegas, Nevada, US
Rep Power: 380 
Originally posted by berettagtz117
I have something to add. I am getting a Type s sway bar from my friend he just ordered a full suspension setup and he is giving me all of his stock stuff for free The question I have is will the RSX endlinks work on my 02 ex coupe? SO I dont have to worry about upgrading. Thanks
I have something to add. I am getting a Type s sway bar from my friend he just ordered a full suspension setup and he is giving me all of his stock stuff for free
The question I have is will the RSX endlinks work on my 02 ex coupe? SO I dont have to worry about upgrading. Thanks they are the same thing. the RSX endlinks = the Civics endlinks.... go figure?
Registered!!
iTrader: (5)
Joined: May 2001
Posts: 1,143
Likes: 4
From: Fort Oglethorpe
Rep Power: 315 Originally posted by clownprince
can someone with an 01 sedan talk about their install and how long it took? I know you have to drill some holes so any info would be helpful, I might be getting a free RSX-S bar, and will need some info.
can someone with an 01 sedan talk about their install and how long it took? I know you have to drill some holes so any info would be helpful, I might be getting a free RSX-S bar, and will need some info.
You can get Grey's DIY for 01 dx/lx from my site at the url below (397k).
http://www.sceniccityonline.com/pdf/diyrearswaybar.pdf
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
fordover
Suspension Performance Modifications
1
Jul 11, 2015 09:10 PM
Bill in San Jos
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
Jul 10, 2015 12:32 PM
fvckbg
Mechanical Problems/Vehicle Issues and Fix-it Forum
4
Jul 7, 2015 07:08 PM
robbie374
Electrical, Wiring, and In Car Entertainment
4
Jul 7, 2015 02:56 AM
