Rep Power: 0

Hey whats up guys, im not a big suspension guy so please bare with me. Ok i have an 02 ex coupe and my friend just gave me an EP3 rear sway bar. I was just wondering if it would fit my car and if it does, what parts would i need to install it. I talked to someone else about it and they were saying something about brushings end links and clamps. I honestly wasnt paying attention because the guy was hrd to understand. I really really want to put this piece on so any help would be greatly apprciated. thanks

matt

 
Rep Power: 0

bushings and endlinks i what you need, not sure about the clamps. ask your friend if he still needs his, if not, just get them from him.

 
Rep Power: 413

no you don't need endlinks. You have stock endlinks on your EX. You need the bushings and holders for the sway bar.

 
Rep Power: 433

you can use it. it will fit on ex. use stock bushings and stock endlinks
ep3 sway bar is 15mm

 
Rep Power: 0

Hey thanks alot guys. So all i really need are the stock ep3 brushings and stock ep3 holders? Thanks alot again for the help.

matt

 
Rep Power: 433

no. you can use your stock bushings and endlinks