i just got my rear spc chamber and dont have a clue to put it on, i called the shop and they say it will be $55 an hour for labor in my car, so i decided to put it on my self.. any help would be appriciated, if with pics it will be greatly appriciated 
its REALLY easy to put on, just jack the back end up, remove the tires, then you'll see the old pieces, just remove those, and put the new ones on, its %100 bolt on, took me like 20 minutes... Just start doing it and you'll see how easy it is. I used a level to make sure my wheels were somewhat perpendicular and got an alignment shortly after. Hope this helps. Later...
make sure you lower the car before you tighten the big bolt (the one one that connects to the brakes)... you need to preload the bushing or else it won't sit right...
thank you very much for all of yhal inputs, thats why this place is the bomb...
