Mechanical Problems/Vehicle Issues and Fix-it Forum If you've got a problem you just can't figure out, a noise you can't diagnose, or a Check Engine Light that won't go away, ask about it here!

Need Help Please!

Thread Tools
 
Search this Thread
 
Old Jul 2, 2006
  #1  
bg0218as's Avatar
Thread Starter
Registered!!
 
Joined: Feb 2005
Posts: 89
Likes: 0
From: West Palm Beach,FL
Rep Power: 0
bg0218as is an unknown quantity at this point
Need Help Please!

for a while now i have had this code on and i am just now getting around to getting it fixed, code P0134 o2 Sensor Circuit No Activity Detected (Bank 1 Sensor 1) what could possibly be the cause of this. is possibly time to replace the sensor i only have 32,000 miles on the car i do have the dc sports race header and it relocated the sensor. so any help would be great thanks.
Reply
Old Jul 2, 2006
  #2  
gearbox's Avatar
Premium Member
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (95)
 
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812
gearbox has a reputation beyond reputegearbox has a reputation beyond reputegearbox has a reputation beyond reputegearbox has a reputation beyond reputegearbox has a reputation beyond reputegearbox has a reputation beyond reputegearbox has a reputation beyond reputegearbox has a reputation beyond reputegearbox has a reputation beyond reputegearbox has a reputation beyond reputegearbox has a reputation beyond repute
which 02 sensor. there is two the first is for a/f second is for emissions. if you have a race header the cel will come on obviously. usually you can just get an 02 sim that will fool the ecu into thinking everythings fine
Reply
Old Jul 2, 2006
  #3  
bg0218as's Avatar
Thread Starter
Registered!!
 
Joined: Feb 2005
Posts: 89
Likes: 0
From: West Palm Beach,FL
Rep Power: 0
bg0218as is an unknown quantity at this point
any help anyone please thanks

its the primary o2 sensor (1st one) i understand that but it reading no activity detected that would mean no signal right.

Last edited by bg0218as; Jul 2, 2006 at 08:39 PM. Reason: Automerged Doublepost
Reply
Old Jul 8, 2006
  #4  
hatE's Avatar
Registered!!
iTrader: (3)
 
Joined: Mar 2005
Posts: 165
Likes: 0
From: Orange County, SoCal
Rep Power: 0
hatE is an unknown quantity at this point
daym i have tha same problem too..
Reply
Old Jul 10, 2006
  #5  
Sinisterdexter's Avatar
I Pinch.
iTrader: (3)
 
Joined: Mar 2006
Posts: 632
Likes: 0
From: Morris County, NJ
Rep Power: 253
Sinisterdexter is a glorious beacon of lightSinisterdexter is a glorious beacon of lightSinisterdexter is a glorious beacon of lightSinisterdexter is a glorious beacon of lightSinisterdexter is a glorious beacon of lightSinisterdexter is a glorious beacon of light
If it's giving no signal the wire could have possible gotten disconnected or cut. Or the sensor could be dead. Thankfully it's not that hard to do or get done.

I had a sensor blow on me, 55 for the sensor 20 for the install.
Reply
Old Feb 5, 2007
  #6  
04CivicTurbo's Avatar
Registered!!
 
Joined: Feb 2006
Posts: 9
Likes: 0
From: O-town, Florida
Rep Power: 0
04CivicTurbo is an unknown quantity at this point
Ha,

this seems a common problem. I also have this code. I have an o2 sensor replicator on the secondary, but didnt know they made them for the first 02 sensor.

Sinisterdexter, where did you get a sensor for 55? the cheapest i've found it around 80 for a splice in kit, not direct plug into stock...
Reply




All times are GMT -5. The time now is 05:54 AM.