Rep Power: 0

Hey guys put my car up on the lift today to do my leaking rear main only to see that my front MOTOR MOUNT was broke. I do autocross and epected as much as I am sorta hard on her. The question is, and I see it has been asked but not answered (except the unreliable 3M Caulk filling the holes in the mount) is there something else that would work like the poyurethane bushings for a 96-00 Civic from Energy Suspensions or what? I know Hasport doesn't have em. Suggestions??

 
Rep Power: 0

Energy has D17 inserts.

 
Rep Power: 0

Apparently Deyeme Racing makes them. I have searched their site, and came up with nothing. Call them and find out. They are located in AZ (where I live), and somebody sent me a PM telling me about them. Call them up and see. I think its in the 1-200 range for all new mounts. polurethane I believe, but not sure. He said they are really good, but dont get the more extreme ones, since they are harsh for daily driving. But you can make the decision on what you need. Check em out though

Deyeme Racing

 
Rep Power: 0

Oh, and if you get an answer, or decide to check them out, post back in here, and let me know the info on them. Like how much, and how they work out. Ive had my stock one replaced, and it is busted again I believe, I am very hard on my car. I want something that will hold up. too jerky to shift

 
Rep Power: 304

How can you tell if your motor mounts are busted?

Can I tell from the feeling of the car?

 
Rep Power: 0

put your car up on a lift, get a flashlight and look where your motor mounts up to the frame you will see a big rubber filled bracket. If one of the arms is broken from the metal , then your mount is broken. You may not notice right away but you will the worse it gets, and there is more vibration and etc.







Secondly, thanks about Deyeme and I still hope D17 inserts from Energy is right. Hey Dad, did you actually get the inserts then? I will try them as well Gabe if Energy is too much or whatnot. BTW you got a number for Deyeme? (If not I will have to Google its just easier this way) Thanks again guys and I will post here if anything more happens, Steve-o

 
Rep Power: 0

I got them from Summit for $30 shipped, there not in yet, but I did double check the part number to the web site and it matched. There is a thread of someone who put them in. I'm waiting to do my Exedy clutch.

 
Rep Power: 0

yeah I went to the Energy Suspension site they have the 2001-2004 Civic solid polyurethane press-in mounts as part # 16.1111 they do not SELL them though, lol they distribute them lol. So, Summit has them as ENS-16-1111R or B for red and Black. Its $22 for em so I will tell you how they all go, but it is just the inner parts that replace the rubber, they are supposed to be pressed in. Keep in touch guys. I will post more later.