check engine light code OBDII
Thread Starter
Registered!!
iTrader: (6)
Joined: Jun 2002
Posts: 2,549
Likes: 0
From: New York
Rep Power: 316 
check engine light code OBDII
okay so i have my turbo in for a few weeks now and everything has been good.
BUT day before yesterday my check engine light came on so i checked the ecu and got the followeing code.
trouble code OBDII (alpha) P code
PO133
the pcm has determined that the responce time fro the oxygen sensor 1 bank 1 was too slow during testing. oxygen sensor 1 is the closest to the cylinder head before the catalytic converter. while oxygen sensor 2 and 3 are located further downstream and are typically in or after the catalytic coverther. bank 1 identifies the location of cylinder 1. while bank 2 indentifies the cylinders on the opposite bank.
if anyone knows what this means, if it is serious or not, and if its something to worry about ild appreciate it. or how to fix.
BUT day before yesterday my check engine light came on so i checked the ecu and got the followeing code.
trouble code OBDII (alpha) P code
PO133
the pcm has determined that the responce time fro the oxygen sensor 1 bank 1 was too slow during testing. oxygen sensor 1 is the closest to the cylinder head before the catalytic converter. while oxygen sensor 2 and 3 are located further downstream and are typically in or after the catalytic coverther. bank 1 identifies the location of cylinder 1. while bank 2 indentifies the cylinders on the opposite bank.
if anyone knows what this means, if it is serious or not, and if its something to worry about ild appreciate it. or how to fix.
I need TP for my bunghole
iTrader: (3)
Joined: Jan 2003
Posts: 7,103
Likes: 0
From: OXNARD, CA. SoCal. "805", North of L.A.
Rep Power: 360 
http://www.troublecodes.net/OBD2/
P0133 = O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)
Try taking the sesor out and cleaning the deposites on it, so it can get a better reading.
If you still get the same readout it maybe time for a sensor replacement.
I know the follwong makes replacements
aem, denso
P0133 = O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)
Try taking the sesor out and cleaning the deposites on it, so it can get a better reading.
If you still get the same readout it maybe time for a sensor replacement.
I know the follwong makes replacements
aem, denso
Last edited by PunkingCivic; Apr 12, 2004 at 12:26 PM.
Thread Starter
Registered!!
iTrader: (6)
Joined: Jun 2002
Posts: 2,549
Likes: 0
From: New York
Rep Power: 316 Originally posted by PunkingCivic
http://www.troublecodes.net/OBD2/
P0133 = O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)
Try taking the sesor out and cleaning the deposites on it, so it can get a better reading.
If you still get the same readout it maybe time for a sensor replacement.
I know the follwong makes replacements
aem, denso
http://www.troublecodes.net/OBD2/
P0133 = O2 Sensor Circuit Slow Response (Bank 1 Sensor 1)
Try taking the sesor out and cleaning the deposites on it, so it can get a better reading.
If you still get the same readout it maybe time for a sensor replacement.
I know the follwong makes replacements
aem, denso
I need TP for my bunghole
iTrader: (3)
Joined: Jan 2003
Posts: 7,103
Likes: 0
From: OXNARD, CA. SoCal. "805", North of L.A.
Rep Power: 360 http://www.hondaautomotiveparts.com/...5=EXHAUST+PIPE
here is a diagram and pricing for a new 02 sensor
here is a diagram and pricing for a new 02 sensor
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
tylerginevan
Hybrid Engine/IMA battery system
10
Apr 27, 2015 12:29 PM
dragonsblood
Mechanical Problems/Vehicle Issues and Fix-it Forum
6
Apr 27, 2015 12:28 PM
dooner24
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
Apr 14, 2015 07:51 PM
bahena08
7th Generation Civic 2001 - 2005
2
Apr 11, 2015 05:09 PM
