Rep Power: 0

So I was kind of an idiot when I bought this car. Already I've replaced a motor mount, battery, alternator, terminal connectors and there are still several things that need to be done and I've only had for around 8 months. But ultimately 2nd gear has been grinding as I pull the clutch OUT. Goes in just fine when the pedal is to the floor, but grinds on the way out. I've been thinking I need to replace my clutch in its entirety but I thought I'd talk to the experts first Anybody have any ideas as to what this could be? My buddy's dad told me he thinks it's the pressure plate.

 
Rep Power: 519

Expected Average Not usual problems.A clutch problem should affect all gears equally.
You only have an issue with a single gear.
Look to shifter and cables, or internal trans problems.

 
Rep Power: 0

Ah i forgot to mention it does this in reverse as well. And around 5000 rpms it grinds all gears clutch pedal to the floor

 
Rep Power: 519

So then the clutch is not fully disengaging when the pedal is on the floor?

Fluid low or air bleed, pedal pushrod adjustment, or a real clutch problem?

Floormats stuck under the clutch pedal?

Fluid trapped in the rubber boot of the slave cylinder can cause issues like this too.