Rep Power: 0

So here is my issue I just found out on my 07 civic.
I replaced all shocks and struts and front control arm and upper wear control arm to on my 02 civic.. I going around a corner about 65mph and part of the road was not that level and when the car reached that uneven part on the corner ,the car goes up and down as normal but that's not my issue, the car goes side to side around the corner and that's not normal..the shocks and struts or not the best in quality as I bought them on rick auto website. Those anyone have any answers or idea? I'm thinking it's my shocks and struts but I would like some expert advice.

 
Rep Power: 243

Did you hook the sway bar back up?

 
Rep Power: 0

I didn't need to unhook my sway bar..
I'm thinking it's my struts and shocks..they weren't that expensive type. I bought them on rock auto I pay little over 200 for the 4

 
Rep Power: 0

That very well could be. I bought front struts off amazon and I got two different strut manufacturers struts. I put them on and can definitely tell one is lower quality than the other as the car bounces more on the right than the left side.

 
Rep Power: 0

My issue was fixed after a year of new tyres, struts, sway bar links etc. Turned out to be a cradle shift castor on the front cradle (sub frame) which made the rear feel unstable at speeds and over bumps. I took it for another alignment (3rd try) and after driving it they figured out the problem.

 
Rep Power: 0

Wow a castor in the sub frame. I will have that checked when I go for an alignment.

 
Rep Power: 0

So what is a cradle shift castor? I tried look it up but i didn't come up with nothing other than control arms. I have never heard that name before.

 
Rep Power: 222

He has a different generation of civic, you don't have that on your car

 
Rep Power: 0

Oh ok..