if u could have any car.....
HISPAnIC CAUSIn PAnIC
Joined: Dec 2001
Posts: 4,394
Likes: 0
From: sacramento, California, US
Rep Power: 0 
Originally posted by Catalyst
you guys dont have sh*t on my car....
there isnt a street legal car on the planet that can touch this
8.950 ET @ 153.63 mph
straight from the shop.
2003 corvette Z06 with the lingenfelter setup
that is:
Two true ball bearing turbochargers
Two high efficiency air to air chargecoolers
Custom molded Samco silicone air ducts
4 into 1 custom cast exhaust manifolds
Two cast turbo outlet adapters
Turbocharger scavenge pump
Turbo oil drain reservoir
Two K&N 360 degree conical air filters
Heat shields and stainless clamps
Professional installation, testing and tuning
Turbocharger water feed and return hoses
Turbocharger oil feed and return hoses
Gaskets, spark plugs and fluids
Custom 7.0 L aluminum C5R block
CNC Porting and polishing of LS1 cylinder heads
Port matched LS6 intake manifold
Billet steel connecting rods
Forged 4340 crankshaft
Forged aluminum pistons
LPE custom hydraulic roller camshaft
High performance valve springs & lightweight retainers
Stainless steel one piece heavy duty intake valves
Inconel one piece heavy duty exhaust valves
Three angle valve job, checking of spring tensions & heights
Computer balanced rotating assembly
Reassembly and blueprinting of engine
Properly sized fuel injectors and high capacity fuel system
GHL stainless steel exhaust system
Professional installation, testing and PCM recalibration
LPE's 2 year / 24,000 mile warranty
it is an outstanding 750 whp and 650 ft/lbs on pump gas.
The cool thing is, the car is $60,000, and the kit is $49,995.00
So i am under $110,000.
See ya Enzo!!!
ferrari
you guys dont have sh*t on my car....
there isnt a street legal car on the planet that can touch this
8.950 ET @ 153.63 mph
straight from the shop.
2003 corvette Z06 with the lingenfelter setup
that is:
Two true ball bearing turbochargers
Two high efficiency air to air chargecoolers
Custom molded Samco silicone air ducts
4 into 1 custom cast exhaust manifolds
Two cast turbo outlet adapters
Turbocharger scavenge pump
Turbo oil drain reservoir
Two K&N 360 degree conical air filters
Heat shields and stainless clamps
Professional installation, testing and tuning
Turbocharger water feed and return hoses
Turbocharger oil feed and return hoses
Gaskets, spark plugs and fluids
Custom 7.0 L aluminum C5R block
CNC Porting and polishing of LS1 cylinder heads
Port matched LS6 intake manifold
Billet steel connecting rods
Forged 4340 crankshaft
Forged aluminum pistons
LPE custom hydraulic roller camshaft
High performance valve springs & lightweight retainers
Stainless steel one piece heavy duty intake valves
Inconel one piece heavy duty exhaust valves
Three angle valve job, checking of spring tensions & heights
Computer balanced rotating assembly
Reassembly and blueprinting of engine
Properly sized fuel injectors and high capacity fuel system
GHL stainless steel exhaust system
Professional installation, testing and PCM recalibration
LPE's 2 year / 24,000 mile warranty
it is an outstanding 750 whp and 650 ft/lbs on pump gas.
The cool thing is, the car is $60,000, and the kit is $49,995.00
So i am under $110,000.
See ya Enzo!!!
ferrari if i had the money i would do that to a zo6 BUT my dream car. 1964 impala conv painted candy blue flake with a white ragtop and 13" chrome daytons fully custom interior with a killer hydro set up
HISPAnIC CAUSIn PAnIC
Joined: Dec 2001
Posts: 4,394
Likes: 0
From: sacramento, California, US
Rep Power: 0 Originally posted by R3DL1N3
2002 Mazda RX7 Spirit R FD3S
Glass Black Paint
then spend $60,000+ on performance parts and exterior/interior parts.
900hp+ drift monster. yeeaaahhh...
2002 Mazda RX7 Spirit R FD3S
Glass Black Paint
then spend $60,000+ on performance parts and exterior/interior parts.
900hp+ drift monster. yeeaaahhh...
This shirt is Dry Clean only, which means it's dirty. -Mitch Hedberg
Joined: Sep 2003
Posts: 1,407
Likes: 0
Rep Power: 290 
Finally a Z Owner
Joined: Mar 2003
Posts: 347
Likes: 0
From: Kuwait via Colorado
Rep Power: 0 Dodge Hennessey Twin Turbo Vemon Viper 1000... Really almost anything from Hennessey Motor Sports: http://www.hennesseyperformance.com/...ance/index.php
A replica GT40 MkI done up in the Gulf Oil color scheme. check the inside back page of this month's Motor Trend to see what I'm talking about. I'd want a replica, because I'd be to paranoid to drive a real one. Ford's new GT is good, but it's too civilized for me.
Registered!!
iTrader: (1)
Joined: Jul 2002
Posts: 2,699
Likes: 0
From: Montreal, Quebec, Canada
Rep Power: 0 I gotta say R34 Skyline Vspec || and try and get it too 1,000jp on pump gas (Race Car) if not I'll take the Blitz R34. Supercar Lamborghini Diablo 6.0SE/Sportec SP700, Everyday Car WhiteShark Corvette or any of Brabus' V12.
Got Capitalization?
Joined: Sep 2003
Posts: 263
Likes: 0
From: California
Rep Power: 0 If I had a Choice of Any Car or Truck
My Car Choice Would Be:
2004 Honda Civic LX Sedan With Automatic Transmission
My Truck Choice Would Be:
2004 Honda CRV EX 4wd With Automatic Transmission
My Car Choice Would Be:
2004 Honda Civic LX Sedan With Automatic Transmission
My Truck Choice Would Be:
2004 Honda CRV EX 4wd With Automatic Transmission
Reppin Stage 7
