Convo with Auto Laminar
Thread Starter
Registered!!
iTrader: (1)
Joined: Aug 2001
Posts: 6,202
Likes: 1
From: Car Audioville, Quebec, Canada
Rep Power: 0 
Convo with Auto Laminar
Hi Donald,
50 HP should not be out of the question. Let me know when your ready.?
Thanx
Robert
(514) 595-5394
-----Original Message-----
From: donald phillips [mailto
mtp@lycos.com]
Sent: lundi 9 septembre 2002 02:24
To: Rob
Subject: RE: 2k1 Civic sedan
Hey Rob,
I know from Eric you guys are insanely busy so take your time if need be, I
wouldn't be getting anything done untill late october anyhow. But.. Given,
new pistons, new cams, Headers(I have the ULEV with dual cats) decked, and
ported heads...how much of a gain could be expected?. I would not assume
more than a 30-40HP gain would be feasable?,,
Cheers
Donald
On Sun, 8 Sep 2002 22:10:06
Rob wrote:
>Hi Donald,
>
>Pistons are about $ 1,000.00, head port & polish & deck around $ 600.00,
>cams from $ 750.00 -
>1,500.00, Hondata around $ 1,000.00 (fuel system), nitrous about $
>1,000.00 - $ 1,500.00.
>
>The K20A2 motor kit would run about $ 10,000.00 - $ 12,000.00.
>
>Thanx
>
>Robert
>(514) 595-5394
Note..all prices are $CAD [IMG]i/expressions/face-icon-small-smile.gif[/IMG]
50 HP should not be out of the question. Let me know when your ready.?
Thanx
Robert
(514) 595-5394
-----Original Message-----
From: donald phillips [mailto
mtp@lycos.com]Sent: lundi 9 septembre 2002 02:24
To: Rob
Subject: RE: 2k1 Civic sedan
Hey Rob,
I know from Eric you guys are insanely busy so take your time if need be, I
wouldn't be getting anything done untill late october anyhow. But.. Given,
new pistons, new cams, Headers(I have the ULEV with dual cats) decked, and
ported heads...how much of a gain could be expected?. I would not assume
more than a 30-40HP gain would be feasable?,,
Cheers
Donald
On Sun, 8 Sep 2002 22:10:06
Rob wrote:
>Hi Donald,
>
>Pistons are about $ 1,000.00, head port & polish & deck around $ 600.00,
>cams from $ 750.00 -
>1,500.00, Hondata around $ 1,000.00 (fuel system), nitrous about $
>1,000.00 - $ 1,500.00.
>
>The K20A2 motor kit would run about $ 10,000.00 - $ 12,000.00.
>
>Thanx
>
>Robert
>(514) 595-5394
Note..all prices are $CAD [IMG]i/expressions/face-icon-small-smile.gif[/IMG]
Registered!!
Joined: Jul 2001
Posts: 332
Likes: 0
From: Atlanta, Georgia, US
Rep Power: 0 Personally, I would go with the AEM-EMS fuel system before Hondata. Also, news just came out today that Crower has some rods out for our car starting at 177$per, and around 480$per for titanium.
RESIDENT ROTOR HEAD
Joined: Jan 2002
Posts: 3,207
Likes: 0
From: , Other, ZEBRA
Rep Power: 329 Hey bro that sounds like a pretty nice setup, but have you considered the turbo that moocow and a few other members have. They're runnning 5 PSI with stock internals, but I've been reading on a few other threads that reenforced rods and possibly cams are in the making for the end of this year. Possibly an aluminum intake manifold? The potential for the D17 is growing.
Registered!!
Joined: Jun 2002
Posts: 272
Likes: 0
From: Lexington, Kentucky, US
Rep Power: 0
Quote
[hr]Originally posted by: nookiemonster
Hey bro that sounds like a pretty nice setup, but have you considered the turbo that moocow and a few other members have. They're runnning 5 PSI with stock internals, but I've been reading on a few other threads that reenforced rods and possibly cams are in the making for the end of this year. Possibly an aluminum intake manifold? The potential for the D17 is growing.[hr]
[hr]Originally posted by: nookiemonster
Hey bro that sounds like a pretty nice setup, but have you considered the turbo that moocow and a few other members have. They're runnning 5 PSI with stock internals, but I've been reading on a few other threads that reenforced rods and possibly cams are in the making for the end of this year. Possibly an aluminum intake manifold? The potential for the D17 is growing.[hr]
Quote
[hr]Originally posted by: avenger
like $1.15 [IMG]i/expressions/face-icon-small-wink.gif[/IMG][hr]
[hr]Originally posted by: avenger
Quote
[hr]Originally posted by: TYPE7RS
so what would 10,000- 12,000 CAD be in USD for the K20A2?[hr]
[hr]Originally posted by: TYPE7RS
so what would 10,000- 12,000 CAD be in USD for the K20A2?[hr]
like $1.15 [IMG]i/expressions/face-icon-small-wink.gif[/IMG][hr]
[IMG]i/expressions/laugh2.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG]
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
solarpunk70
Mechanical Problems/Vehicle Issues and Fix-it Forum
6
Apr 12, 2016 11:43 AM
Bruce2
Mechanical Problems/Vehicle Issues and Fix-it Forum
0
Sep 27, 2015 08:45 PM
Skunkone
Mechanical Problems/Vehicle Issues and Fix-it Forum
12
Sep 24, 2015 04:38 PM
