Rep Power: 0

I think Trenton is enough..and all I am doing is drawing what they want. It will only be like sidewalk and street improvements anyway...no buildings [IMG]i/expressions/face-icon-small-tongue.gif[/IMG]

 
Rep Power: 340

aw cmon.. please?

 
Rep Power: 0

Wazzzz up fellaz? Snow stinks. I went to Lowes to get a snow blower and they were all out so now I got to go back tonight and talk to a manager to see if I can buy one now and get it when the shipment comes. I also need to go get carpet for my basement from there too. Basement is almost done

 
Rep Power: 340

my dad got one free from his boss

well tonite, my manual shift boot came in, so i installed that and made a DIY. DIY here. looks pretty snazzy

 
Rep Power: 0

Got the snow blower today and the diy looks good Tomo!

 
Rep Power: 0

Picked up this months issue of HondaTunning and they do a K20a2 swap in our civic and the swap seems easy as hell all bolt on no major modify they wind up using the RSX sub and it bolted right up to our civic with no problem same goes with exhuast piping only diffrence is you'll have to swap your radiator for a 2002 si which is a little smaller also you'll have to use the RSX computer You guys must get this issue and read up on it and see what Im talking about the only problem is the sticker price which they claim is about $10. grand, about $6.000 for the motor only due to there aint to many wrecked RSX's out there give it another year or so and Im sure the price will drop. Im seriously think of doing this some time in the future.

here is a link but it doesn't show you how they did you'll have to buy the mag to see that part
SWAP

 
Rep Power: 340

i was readin that at the mall the other day.. got my brain tickin.. civic+k20+turbo=VRRRRRROOOOOOOOOOOOOMMMMMM *ppsshhhhhh* i want it bad!

 
Rep Power: 0

Yeah I saw that in my Honda Tuning. Looks cool but for the 10 grand I would rather of just tacked on an extra 6 onto my civic and bought the rsx myself. But it was cool and hasport knows there Honda stuff very well. I was checking out there stuff for my hatcha while back.

 
Rep Power: 0

HAHAHAHAHAHAAH Tomo got yelled at for his Bling Bling signature [IMG]i/expressions/laugh2.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG]

And Tomo, read what I quoted you in your DIY thread....why did you say that?

 
Rep Power: 340

everyone needs cable damnit! lol


shuddup bobby... lol

 
Rep Power: 0

well before the track closed i went out.....ran a 14.287 @ 101mph
MOTOR BLEW UP..............turbo is gone........


.................project k20a................prepare for a new breed of 7th gen......


scott

 
Rep Power: 0

well, that did not take long [IMG]i/expressions/face-icon-small-tongue.gif[/IMG] Sorry bout the luck though.

 
Rep Power: 0

Why did the motor blow was it the turbo set up or was it something you did? if it wasnt the turbo do you plan on selling it?

 
Rep Power: 0

Well, I got my Optima battery in just now. I need to order a 2 gauge terminal connector though cause my 4 gauge is just a bit too bit and the positive side is not staying in tight enough. I also need to come up with an idea for a battery tie down that holds the battery in good and looks good at the same time.

 
Rep Power: 0

Didnt you buy one like mines that is adjustable?

 
Rep Power: 0

Yeah but the Optima is about 1.5" lower than our stock battery. I am going to give my dad some dimensions and he is going to try to make me one at work.

 
Rep Power: 0

Like my new signature guys?

 
Rep Power: 340

bet thats really gay **** you 2 are lookin at [IMG]i/expressions/laugh2.gif[/IMG]

 
Rep Power: 0

Dammm it! I told Mike that someone would be able to tell that it was **** and not an exhaust catalog!

[IMG]i/expressions/laugh2.gif[/IMG]

 
Rep Power: 340

[IMG]i/expressions/laugh2.gif[/IMG]

 
Rep Power: 0

What is the **** is going on over here? This thread if freakin' dead! Ok well my dad made me a stainless steel battery tie down that fits perfect so far. I have to dril two holes in it for the bolts and if I don't screw that up then it is all good We are also going to sty and make a stainless steel sparkplug wire cover and some other pecices this winter

 
Rep Power: 340

nice if you have any scrap metal left over, make me some

 
Rep Power: 0

Oh ok Tomo...do you want a metal mullet for your car? [IMG]i/expressions/moon.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG]

 
Rep Power: 340

no, i want a japanese metal mullet [IMG]i/expressions/laugh2.gif[/IMG]

 
Rep Power: 304

Yeah, this place is pretty damn dead. Oh well though, I'll be home tomorrow for a whole month I'll be spending my time painting my interior and trying to get a huge scratch out that some ***** left with his/her door. Any sugestions on how to get it out?? [IMG]i/expressions/face-icon-small-confused.gif[/IMG][IMG]i/expressions/face-icon-small-confused.gif[/IMG] And where do you think I can get paint for my trim? Oh yeah, we should have a christmas meet [IMG]i/expressions/face-icon-small-smile.gif[/IMG] we could put lights on our cars and drive around town.. lol [IMG]i/expressions/laugh2.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG] Talk to ya'll later

~nick~

 
Rep Power: 340

for paint, uhh.. hm, if you want just plain silver, goto like autozone or some car part store.. if you want to match the paint to something, go to a paint store and bring in wat you want to match it to, and they'll do it for ya.

and where exactly are we supposed to plug in the lights man? [IMG]i/expressions/laugh2.gif[/IMG]

 
Rep Power: 304

real real long extension cord [IMG]i/expressions/laugh2.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG][IMG]i/expressions/laugh2.gif[/IMG]

~nick~

 
Rep Power: 340

[IMG]i/expressions/laugh2.gif[/IMG] good call

 
Rep Power: 0

Well, I just found the strut bar of my dreams...Now I gotta go see if Flexivity can get it for me.

Strut Bar I found

Oh, thanks to Edgar too

 
Rep Power: 340

which strut bar?