o2 sensor identification
Thread Starter
Registered!!
Joined: Apr 2015
Posts: 1
Likes: 0
Rep Power: 0 
o2 sensor identification
Hey everyone!
So I've been working on my Ej8 for the past few months and am slowly working out all the problems and moding it how I want it to be...
But I've run into a hangup! I pulled the forward o2 sensor off the maniofold and all thats on it is " NS6 0655-9760 10Q10 "
I have searched and can't seem to find a answer to what make it is...
any help would be appreciated!
Also is it okay to remove the heat shield from the exhaust manifold and leave it off?????
Thanks again!
So I've been working on my Ej8 for the past few months and am slowly working out all the problems and moding it how I want it to be...
But I've run into a hangup! I pulled the forward o2 sensor off the maniofold and all thats on it is " NS6 0655-9760 10Q10 "
I have searched and can't seem to find a answer to what make it is...
any help would be appreciated!
Also is it okay to remove the heat shield from the exhaust manifold and leave it off?????
Thanks again!
If you think a good mechanic is expensive, try hiring a bad one
Joined: Dec 2011
Posts: 32,017
Likes: 256
From: Midwest. Aiming about mid-chest
Rep Power: 517 
Re: o2 sensor identification
Wire wheel the rust off and look closely.
Here's an example of a couple NTK sensors.
Alternatively, look up the Honda part number and google it to see who made it, then go to that manufacturers website and look it up.
Here's an example of a couple NTK sensors.
Alternatively, look up the Honda part number and google it to see who made it, then go to that manufacturers website and look it up.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
BootyDo
7th Generation Civic 2001 - 2005
8
Jun 21, 2016 03:45 PM
Green02civic
Mechanical Problems/Vehicle Issues and Fix-it Forum
13
Jul 27, 2015 10:48 PM
mistermenphis22
Mechanical Problems/Vehicle Issues and Fix-it Forum
13
Jul 13, 2015 04:43 PM
