d15b2 block d16z6 vtec head issues
Thread Starter
Registered!!
Joined: Sep 2011
Posts: 1
Likes: 0
Rep Power: 0 
d15b2 block d16z6 vtec head issues
hi all im in need of major help my engine will not start im getting plenty of fuel and spark but no start it cranks and sounds like it wants to kick but wont im thinking timing but any or all suggestions would help out alot thanks
Registered!!
Joined: Sep 2011
Posts: 2
Likes: 0
From: New Kensington
Rep Power: 0 Re: d15b2 block d16z6 vtec head issues
I am having the same issues, but hve yet to figure anything out. I have reset my timing.....repeatedly, with different settings of advance and retard. She still wont start and I dont get it!!
Registered!!
Joined: Sep 2011
Posts: 2
Likes: 0
From: New Kensington
Rep Power: 0 
Re: d15b2 block d16z6 vtec head issues I found that my CPS was not hooked up, but that didnt solve my problem. I found another ecu in my basement, but it is a P0B A01, which obviously is for an Accord, but it started my car right up, idles straight and everything. I then put my chipped P28 back in it and the same sh** happens....I dont know what else to do. I had my chip checked and reburned just to make sure everything was good there. I read somewhere else to check the fuel filter because there could have been a problem with circulation there, but again changing that didnt help. I changed the plugs, re did the timing...AGAIN, and did yet another oil change. Im lost here, any other suggestions??
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Xuhme
Cracked block early R18 Overheating
21
Aug 7, 2023 03:40 PM
thana
Overheating or loss of coolant, heater blowing cold
11
Jun 15, 2020 07:05 PM
Supramk3
Mechanical Problems/Vehicle Issues and Fix-it Forum
1
May 11, 2015 07:55 PM
