Rep Power: 0

OK.. trying to run my power cable through the passanger side firewall... But am I suppose to drill through the firewall.... I can't find an opening. I have a 2002 EX coupe. I've removed all the pannels and pulled the carpet down. I see the velcro piece and cut through that thick sheet of foam. But right behind it, there no opening. Just the firewall. What did I miss?

Steve

 
Rep Power: 0

I ran my power wire down by the passenger floorboard,. next to a drain hose or something. I drilled out a hole next to it, and used a grommet. Good luck.

 
Rep Power: 432

well heres my set up kinda ghetto but oh well works..




and heres firewall..

see all those wires on way left.. just go through there i think . that should work out .

 
Rep Power: 0

thats a ghetto *** job (through the door)... tape the cable to a coat hanger and jam it through the rubber grommett in the picture above

 
Rep Power: 432

yup its ghetto . i was too lazy im going to get my powerwire gothrough firewall soon lol hahah[IMG]i/expressions/laugh2.gif[/IMG]

 
Rep Power: 0

It's easier to run it through the firewall yakes 30 seconds... Just tape a coat hanger wire to the power wire..feed it through the gromett..

Cheers
Mohawk

 
Rep Power: 0

Go with the firewall idea. If you are still having trouble finding the grommet, it's on the passenger side really close to the center console (almost up under the dash). I hope that helps ya.

 
Rep Power: 0

yah.. I finally figured it out... Thanks for the help.

Steve