Rep Power: 0

where is the place that people usually attach the crossovers to? assuming that i want it out of sight.

 
Rep Power: 0

Well, I put mine in the trunk and worked it into my scheme.... But a lot of people put them under the driver seat; use 3M double sided foam tape to put them on the inside of the cover under the steering wheel (the panel that covers the fuse box); I've even heard of people using that same foam tape and mounting them on the insde of the door panel iteself!

Pretty much anywhere in the car.

 
Rep Power: 0

if i mount my components on my doors and sail panels, i would have to run quite a bit of wire back and forth to the trunk. as for hiding it under the seat, i think it is quite hard to run the wire from the doors there and still have the wires out of site. i would prefer to mount them inside the door panels if possible and safe.

 
Rep Power: 0

I have mine mounted inside the door panels. most people do.. almost all shops do that..saves on wiring and space..

 
Rep Power: 0

yeah me too there is a big cut out in the doors i think where the sida airbags would go or something and these plenty of room. then just snake one wire in to the door from your amp and your set

 
Rep Power: 0

i thought the side airbags are in the seats?? anyways, i guess i can just tape the crossovers inside the panels right?? or is it better to use screws??

 
Rep Power: 0

I used Velcro

 
Rep Power: 0

is velcro strong enuf?? how heavy is the crossover? i once tried to use velcro to mount my receiver's remote and it kept falling off.

 
Rep Power: 0

Velco's enough.. most componentscome with 4 strips of adhesive backed velcro allready..

 
Rep Power: 0

ziggy, get some better velcro. lol.

 
Rep Power: 0

damn i guess i paid so much for the 3m industrial kind for no reason.

 
Rep Power: 0

I used zip ties to those square sticky things...forgot their name.