SE Bezel navigation mounting problem
Thread Starter
Registered!!
Joined: Jul 2006
Posts: 21
Likes: 0
Rep Power: 0 
SE Bezel navigation mounting problem Well, I just bought a Pioneer Avic D1 navigation and am still in the 'ordering parts' process of putting it in a 2005 Special Edition. Up until this morning I thought all radio bezels from 2001 - 2005 were all the same.
Pioneer Electronics - In-Dash Navigation
This has 3 pictures of how flush I want my screen to be, however this can only happen if I buy the 2001 - 2005 NOT SE bezel and then get a double-din dash kit from metraonline.com apparentally. I would like to do some sort of custom work; however, here's what another person did, but I want it to sit flush with everything like in the Pioneer pictures.
This is the bezel that I need since, as you can see, has a slight lip around the perimeter of the housing so stuff sits more flush:
Whereas the Special Edition has no lip to hold anything level:
Well, I guess where I am going with this is that I am looking to either:
(1) trade bezels for the non-special edition one
(2) buy one if someone has one they aren't using
(3) find if anyone knows of a mount I can use on the SE bezel?
Thank you guys for your time and I look forward to hearing from you.
-matt
Duck916@comcast.net
Pioneer Electronics - In-Dash Navigation
This has 3 pictures of how flush I want my screen to be, however this can only happen if I buy the 2001 - 2005 NOT SE bezel and then get a double-din dash kit from metraonline.com apparentally. I would like to do some sort of custom work; however, here's what another person did, but I want it to sit flush with everything like in the Pioneer pictures.
This is the bezel that I need since, as you can see, has a slight lip around the perimeter of the housing so stuff sits more flush:
Whereas the Special Edition has no lip to hold anything level:
Well, I guess where I am going with this is that I am looking to either:
(1) trade bezels for the non-special edition one
(2) buy one if someone has one they aren't using
(3) find if anyone knows of a mount I can use on the SE bezel?
Thank you guys for your time and I look forward to hearing from you.
-matt
Duck916@comcast.net
Registered!!
Joined: Nov 2005
Posts: 20
Likes: 0
From: northern virginia
Rep Power: 0 Re: SE Bezel navigation mounting problem
export05exse, i just ordered the dash trim for the 2005 civic ex coupe. i have a ex se also but i put the climate control part for the regular civics and it fit perfectly. then i got the trim kit for the double din radios from metra and it looks great. i'll have pictures up shortly
Registered!!
Joined: Nov 2005
Posts: 20
Likes: 0
From: northern virginia
Rep Power: 0 Re: SE Bezel navigation mounting problem
refer to the attached image. you want part number 11 for your ex se dashboard.
i bought my part from here:
www.hondapartsdeals.com
even though i have a 2005 civic ex se, i put my vehicle as 2005 civic ex. the part was 40 dollars but i figured it was worth it, so i bought it and it looks great.
the exact honda part number is:
77250-S5A-A11ZC
the trim around the radio you can get from metra. heres the link:
http://www.metraonline.com/products.aspx
the metra part numbers are either 99-7865 or 95-7899
I'm guessing you want your final look to be like this:
minus the peach color.
hope this helps.
i bought my part from here:
www.hondapartsdeals.com
even though i have a 2005 civic ex se, i put my vehicle as 2005 civic ex. the part was 40 dollars but i figured it was worth it, so i bought it and it looks great.
the exact honda part number is:
77250-S5A-A11ZC
the trim around the radio you can get from metra. heres the link:
http://www.metraonline.com/products.aspx
the metra part numbers are either 99-7865 or 95-7899
I'm guessing you want your final look to be like this:
minus the peach color.
hope this helps.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
cdt12271
Electrical, Wiring, and In Car Entertainment
0
Apr 23, 2015 11:36 AM
