Official 6"x9" Thread
What is the actual size speakers i need for my front and back? Also i don't want subs i just want nice speakers i wanna spend $400 total but i wanna get it locally where would you guys go best buy / circuit city or tweeter?
I want some what of a big speaker on my rears w/ out going with a sub what do you suggest?
I want some what of a big speaker on my rears w/ out going with a sub what do you suggest?
http://www.circuitcity.com/ssm/Alpin...oductDetail.do
I bought this head unit and im thinking about sony xplod speakers anyone have a bad experience w/ these?
I bought this head unit and im thinking about sony xplod speakers anyone have a bad experience w/ these?
6x9 = coupes
6.5 all around = sedans
IMO, the rear speakers dont do much, so i wouldnt spend too much on a set. just something better than the crappy factory ones as they distort too much. try not to spend over $100 on 6x9's... trust me, i thought it would make a world of difference or more than expected... it doesnt do much. just buy some $50 old pioneers or other lower models cause they wont do too much for you.
DO becareful on choosing a set of 6x9 speakers as most out on the market tend to hit the torsion bar casuing your trunk shocks to 'alter'. i have some jbl 936's and it fits. but my trunk feels just little stiffer, but no biggie at all.
check out this thread: http://www.7thgencivic.com/forums/sh...d.php?t=131036
6.5 all around = sedans
IMO, the rear speakers dont do much, so i wouldnt spend too much on a set. just something better than the crappy factory ones as they distort too much. try not to spend over $100 on 6x9's... trust me, i thought it would make a world of difference or more than expected... it doesnt do much. just buy some $50 old pioneers or other lower models cause they wont do too much for you.
DO becareful on choosing a set of 6x9 speakers as most out on the market tend to hit the torsion bar casuing your trunk shocks to 'alter'. i have some jbl 936's and it fits. but my trunk feels just little stiffer, but no biggie at all.
check out this thread: http://www.7thgencivic.com/forums/sh...d.php?t=131036
put in some kicker impulse 6x9s today and only had one problem, dang magnet was too big kept hitting the two black bars that keep the trunk open..so i cut them lol....but other than that sounds great and wasnt too hard...
Thread Starter
Registered!!
Joined: Aug 2001
Posts: 1,806
Likes: 0
From: SF Bay Area, California, US
Rep Power: 0 
i made this so long ago.... and now im back searching... i thought it looked familiar...
I found some infinity's to put in my old *** 2k1
i'll update when i'm done
I found some infinity's to put in my old *** 2k1
i'll update when i'm done 
Super Hoser
Joined: Aug 2002
Posts: 1,184
Likes: 0
Rep Power: 300 anyone know if
alpine type r SPR-69LP 6x9's fit without removing the trunk springs? if they fit, is a spacer required?
how about infinity kappa 692.5i's? they require..3and 1/16th mounting depth...i doubt they'll fit but i'm just wondering since i already have a set of those on hand...
alpine type r SPR-69LP 6x9's fit without removing the trunk springs? if they fit, is a spacer required?
how about infinity kappa 692.5i's? they require..3and 1/16th mounting depth...i doubt they'll fit but i'm just wondering since i already have a set of those on hand...
Registered!!
Joined: Dec 2005
Posts: 47
Likes: 0
From: Denver, CO
Rep Power: 0 Infinity Kappa series - 692.7i
Fit perfectly with still an inch of room below the magnet!
Strange thing was that 2 screws lined up perfectly, and the other 2 holes were about .5 inch off... Guess I'll find out if 2 screws is enough to hold those down.
Fit perfectly with still an inch of room below the magnet!
Strange thing was that 2 screws lined up perfectly, and the other 2 holes were about .5 inch off... Guess I'll find out if 2 screws is enough to hold those down.
Registered!!
Joined: Dec 2005
Posts: 47
Likes: 0
From: Denver, CO
Rep Power: 0 two questions:
- any of you have to drill new holes for the 6x9 screws, or there a lot of 2-screw & 3-screw installations? :\
- my Infinity Kappas 6x9s for the trunk came with these big hulking crossovers...where can I mount them?
- any of you have to drill new holes for the 6x9 screws, or there a lot of 2-screw & 3-screw installations? :\
- my Infinity Kappas 6x9s for the trunk came with these big hulking crossovers...where can I mount them?
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Touge
Canada East
0
Sep 23, 2015 11:19 PM
Touge
Ottawa
0
Sep 23, 2015 11:14 PM
ZoSoIV
Electrical, Wiring, and In Car Entertainment
6
Sep 17, 2015 07:17 PM
