Rep Power: 266

I disconnected my battery while working on some wiring and now whenever I try to reattach the negative terminal (w/ positive attached) the alarm goes off and won't stop. It's not the factory alarm, but I don't know the brand.

Please save me from my stupidity.

 
Rep Power: 0

so??? mine does that too everytime I reattach my battery. just attach ur battery and when the alarm goes off, turn it off!!!!!

 
Rep Power: 266

it won't respond to the remote

 
Rep Power: 812

lol it shouldn't do that when the batery is hooked up again. If you have a backup battery, it might have a blown fuse or something.

 
Rep Power: 0

mine does that too. try putting the key in, turning it two clicks and then try the remote with the key still in the ignition. works for me.

 
Rep Power: 0

Thats messed up man, mine just goes off with the remote. if u have a back up battery u might want to try using the key that comes with it to turn it off

 
Rep Power: 328

Have you tried to locate the kill switch for the alarm? There should be a hidden switch somewhere in the car where you can turn the alarm off. In our cars, the most common, and easiest loaction, it up above the kick panel/dead pedal area. Should be located somewhere behind or near to the hood release lever, at least that's where most shops would install it, as it's easy to mount to.

 
Rep Power: 266

Yeah it's in there I just am going to be a considerent neighbor and wait til the morning. Thanks everyone for the help I'll let you know how it goes.

 
Rep Power: 489

Wow. Wish you lived near me

 
Rep Power: 0

oh damn neighbours, I bought air tools but was never able to use them.

 
Rep Power: 266

Thanks everyone for your help. I was able to get everything under control finally. Ended up removing the ground on the siren to buy me some time. Turns out I had to use the kill switch as PopcornPlaya suggested.