Rep Power: 0

i have pioneer AVH-P5700 and i wants to add this AVG-VDP1 also known as
Dynamics Processor

any one have this instald....how hard is it......is it worthed....?



i found some cool shots chek it out
http://www.autowereld.com/imagesDB/6...505848_pio.jpg
http://www.autowereld.com/imagesDB/6...053169_pio.jpg
http://www.autowereld.com/imagesDB/6...044130_pio.jpg
http://www.autowereld.com/imagesDB/6...504067_pio.jpg
http://www.autowereld.com/imagesDB/6...504992_pio.jpg
and the best one
http://www.avbuzz.com/audio-video/200507/pioneer-n/

 
Rep Power: 0

I just installed one a few weeks ago in an RSX Type S.. a lot of work.. I guess it's worth the money though. I think it's cool how it gives you real time analysis. I suppose it's a toss up.. if you've installed a navigation system before, this is about the same general idea as far as installation goes.

 
Rep Power: 0

i naver done nevi....
where can i find diy for this......
if u hve pic and where did u place that unit?

shop want 60 to 70 to install......is it good....price....

 
Rep Power: 0

Wow, that's not a bad price at all for installation. Our shop would probably charge $100-$150.. well, probably less if you bought it from us too I suppose.. ehh
I don't have the unit, but I installed one in an rsx at work. it's not really too horrible I suppose. Just a lot of work.. it involves splicing into your reverse sense, speed sense, and other misc things like that. Nothing hard, just time consuming finding all the wires and running them while keep a clean look. In the rsx, I put the unit underneath the driver's seat.. luckily there was enough room there for all the wires and the unit and still maintain operation of the seat to go forward, backward, up and down without hitting any wires or anything. one of the main issues with that specific brain box, is that it must be mounted on a flat surface so you can't just dump it in a panel or under the steering column and it has to be mounted parallel with the car as well.. just a bunch of little happy horse $hit things like that

 
Rep Power: 0

i should get my unit next week.....post some pic when it done

is their any diy on any site meybe??????

 
Rep Power: 0

No idea? lol search for one I suppose.. I doubt there will be though, it's too new.

 
Rep Power: 0

add some links on 1st post

 
Rep Power: 0

very nice....
n1 and n2 doesn't have it right???

 
Rep Power: 0

same unit works on n1 and n2 aswell

 
Rep Power: 0

That's correct.. it uses they all use the same plugs for xm radio and cd changers.

 
Rep Power: 0

i just got my unit today in fedex.....will be intalling in today......installation....seems to easy then wat i thought......only hard part is the finding speed wire....here some pic

 
Rep Power: 0

The vehicle speed sense wire is white with a green stripe located at the PCM.. which is behind the glovebox in connector A, pin 18. The speed sense wire is also blue with a white stripe at the cruise control module which is located at the left of the steering column.

Nothing difficult, just time consuming.. always test your wires first..
Good luck!

 
Rep Power: 0

well done working fine....will post some pic when its done......i like it

 
Rep Power: 0

working but qustion

that green wire i hooked up to ebreak.....
now some of the future i can't use while drving like cange colors vechiel....stuff like that only can when my ebreak is up, is their any way i can use this future while i am driving ??????like hook up a swich like for dvd player.....

 
Rep Power: 289

yes you can but its easier to lift the e-brake just enough until the indicator lights up on the dash then you can adjust everything. on our cars i dont know why anyone installs switches vs. putting a hackysack under the e-brake handle

 
Rep Power: 0

when i lift the E brake littlebit.....just enought to get the light up...i will be able to probllly dind't try ....but that wont slow my car.....???? does it relly using my ebrake???

 
Rep Power: 289

if you take you center console off you will see a pin switch near your e-brake. that pin switch is what tells your hu and dash that the e-brake is engaged. and no it wont slow your car down if you lift it just enough to get the light to come on.

 
Rep Power: 0

for my hu i had to put a toggle swicth to watch dvd while draving......grounding ebrake didnt working........sence this avg-vdp...show location...rmp hp all that stuff on screen......now this unit also got saprate ebrake wire....now if i just same thing that i did for my hu....will it show rpm..gps...that stuff? ????

 
Rep Power: 0

5700 you have to do a toggle switch to trick to get to bypass ebrake. you just can't ground the green wire.

 
Rep Power: 0

kiker i did that alrady for my dvd and it works......but how about the avg-vdp1 it also have that wire....it has gps...system....so if i do that will my gps would work ???

 
Rep Power: 0

It doesn't have GPS.

 
Rep Power: 0

well it tells you where u are and it tell u where to turn and ****...tho..u can also save location....then u just tuch return home....stuff like that

 
Rep Power: 360

most likely the 1st notch on the e-brake is doing NOTHING but making the pads go closer to the drums. i should say don't do it but unless someone actually knows it will cause harm i doubt you will hurt anything

 
Rep Power: 0

i am gone try that asa i get off from work....and see wat happns.....let u know...tomo..also will try get some pics.....

 
Rep Power: 289

you shouldnt even need to pull it up a notch. my light comes on even if is only 1/2 inch up

 
Rep Power: 0

well i did it but it enable the options only for sec or 2 then disable even my ebrake is up.....cuz it sees that car is moving or somthing i dont wat to next now


here some pics

 
Rep Power: 0

wow.. very nice...

 
Rep Power: 317

damn.. what pioneer units is that compatible with?

 
Rep Power: 0

i am using pioneer avh-p5700....any pioneer with tuchscreen...and navi input should work with...

pics didnt come out good...will post better one later...

 
Rep Power: 0

new pics added