Rep Power: 0

hey guys..where did everyone elts take their tach wire lead from, and what color was it? I was looking in behind my gauge cluster to see if i can steal a signal from there, but those wires are wrapped up nice and tight

any info would be appreciated

 
Rep Power: 0

i took mine from the tach test signal wire, its in a small black rubber box behind the passenger headlights, its the purple wire i belive. Check out the DIY for tach install. Goodluck!

 
Rep Power: 0

perfect man..thanks for the quick reply

 
Rep Power: 0

no prob

 
Rep Power: 0

Man..i've been trying for about an hour to find this damn wire..PLEASE HELP!!! what box are you talking about?

 
Rep Power: 0

I'de say he's talking ab the fuse box, but i'm not sure, gonna install a 5inch tach with shift light hopefually everthing will go smoth.

 
Rep Power: 0

damn damn damn..anyone??

 
Rep Power: 0

Hot of the presses, its the blue/ silver wire with the little rubber bootie in the loom that comes from the fuse box, its connected to the violet/white wire from my remote start. Lemme know if you need more help.

edit: In your second pic, its the blue wire with the yellow wire thats tapped into it.

 
Rep Power: 0

so that's where i take my green wire form my tach and wire it to the blue wire. and that will work ?

 
Rep Power: 0

its that little rubber box (not the fuse box). In ur pic its the one with the yellow wire in it

 
Rep Power: 0

hmm..ok..we'll i guess my shift light may be broken because this is what i tried before posting the pics..hmm..ok thanks for the help i'll work on it

 
Rep Power: 0

I pulled my speedometor out and plugged the wire to the little harness. Not sure which one it is put i just touched the wire to each of the little wires until the tach moved. I did it with the car on. If you need pics let me know and btw I have an LX which comes standard with a tach and just added another tach.

 
Rep Power: 0

And clean your dirty little engine while your at it! hahaha

 
Rep Power: 0

lol..i found what wire it is with my volt meter, but now my problems are getting worse by the day. On my tach, the needle does not light up nor does 4-6 rpm.

and yes i need to clean my engine bay..but i'll do it a couple days before turbo install

 
Rep Power: 0

yes, please.

 
Rep Power: 0

Then man! what to you do??? I have the same problem whit the green wire. I connect in the test tach connector an dosen't work.

How you solve the problem???