Rep Power: 786

I have specs for 2 subs and I want somebody to check them out to see if the box requirements would be close to the same for both...

If anybody can help, let me know and I will PM specs

 
Rep Power: 347

You could give WinISD a try, it's free

http://www.linearteam.dk/default.aspx?pageid=winisdpro

 
Rep Power: 310

Send me the specs, I'll tell you what I come up with

 
Rep Power: 296

umm just post the specs man.

 
Rep Power: 310

Post the specs, include as much as possible.

 
Rep Power: 786

Titanium 10:
=========

Fs: 29.9 Hz
Re: 3.7 Ohms
Qms: 9.0
Qes: 0.422
Qts: 0.404
Vas: 28.46 liters
Mms: 168.36 grams
Cms: 168.4 uM/Newton
BL: 16.64 Tesla-M
SPL (1W/1M): 85 dB
Sd: 345 sq cm
Xmax (field): 35mm p-p

Xenon 10d2
=========

Fs: 18.7 Hz
Re: 3.46 ohms (series)
Qms: 30.19
Qes: 0.43
Qts: 0.42
Vas: 43.97 liters
Mms: 277.7 grams
Cms: 260 uM/Newton
BL: 16.3 Tesla-M
SPL (2.83v): 85.31 dB
Sd: 346.4 sq cm
Xmax (measured): 40mm p-p

I just want the specs compared to see if the box for the Titanium is close enough to be good for a Xenon as well

 
Rep Power: 786

bump

can somebody help please

 
Rep Power: 347

Sealed? what volume box? I'm plotting them on winisd now. THe xenon seems to want .847 ft^3, the Titanium .487. The xenon seems like it'll hit considerably lower. The xenon in a .487 box will raise the qtc to .86, the titanium in a .847 box will lower qtc to .59. Honestly though, If you're going to seal them, a larger box won't hurt too much. get a .8-9 cu. ft box, and if necessary, you can put stuff in it to take up space, or, get a box around .6 cu. ft and polyfill it for the xenon, it shouldn't be too bad.

 
Rep Power: 338

if you do decide you want to play with winISD< all you need to model FR in a given box is FS, QTS, and VAS

 
Rep Power: 786

I have them in a ported box right now, 3.0 cubes tuned to 34 hz