Rep Power: 0

Hey everyone, long story short, since I installed my system in my civic, my dad wants me to install a new speakers in my sisters 94' 4Runner. Now there are 4 speakers total, 2-4" speakers in the front, and 2-6.5" speakers in the rear stock, so ill replace them with the same stock size. I went to crutchfield and they have a set of Kenwood KFC-1068S 4" 2-way Speakers and a set of Kenwood KFC-1677 6-1/2" 2-way Speakers. Now, my sister doesn't want anything special that will hit hard, just some speakers that will sound ok. Will this sound decent?

 
Rep Power: 0

did you by chance change the head unit. a friend of mine asked me replace his head unit and i was wondering if you could tell me how you did it.

Whiterabbit helped me out abit but the more information the better

 
Rep Power: 0

Nah, im going to have someone do that professionally. I mean, if I can get the dash apart then id give it a try, we'll see how it all works out. If I can do it, then ill PM you on how to do it.

 
Rep Power: 0

hey i just installed my friends Hu today in his 4runner. it's not that bad. basicly you pry off the trim piece that holds the e-brak, then the shifter trim. then you have to remove all the ***** off the heater control and the face of the heater control then pry off that trim. and then take 2 screws out and you have access. Oh don't forget that the harness kit has to hook up with the connectors connected to the amp not the OEM HU.. pm me if you have any questions