Anyone have a pic of a FIPK in our cars??
Thread Starter
Registered!!
iTrader: (7)
Joined: Nov 2002
Posts: 510
Likes: 0
From: Toronto, Ontario, Canada
Rep Power: 0 
Anyone have a pic of a FIPK in our cars??
Tried searching nothing came up.. Looking for a pic of the K&N FIPK in our cars need to see exactly what it looks like. Thanks for your help
Thread Starter
Registered!!
iTrader: (7)
Joined: Nov 2002
Posts: 510
Likes: 0
From: Toronto, Ontario, Canada
Rep Power: 0 Thanks alot man that helped me out alot. Is this yours by the way? I see the cheap bars fit over it too 
Do you know anything about the proformance with the FIPK
Do you know anything about the proformance with the FIPK 
Tell me what you don't like about yourself....
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (12)
Joined: Oct 2002
Posts: 12,576
Likes: 0
From: Columbia, SC, USA
Rep Power: 413 
no, this isn't mine. I have an AEM CAI.
I hear that it is good because the tube is plastic and doesn't heat up as hot or fast as the metal ones do.
BUT
It is sucking air off the top of the engine block(hot air) and not from under the car like a cold air intake. The colder the air the better. Heat is always what a car is fighting
Take your pick. Which is the lesser of the 2 evils. I like the AEM CAI. I think it looks better than the K&N
This is mine,
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] CAI Top.jpg (37 Kb)
I hear that it is good because the tube is plastic and doesn't heat up as hot or fast as the metal ones do.
BUT
It is sucking air off the top of the engine block(hot air) and not from under the car like a cold air intake. The colder the air the better. Heat is always what a car is fighting
Take your pick. Which is the lesser of the 2 evils. I like the AEM CAI. I think it looks better than the K&N
This is mine,
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] CAI Top.jpg (37 Kb)
Tell me what you don't like about yourself....
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (12)
Joined: Oct 2002
Posts: 12,576
Likes: 0
From: Columbia, SC, USA
Rep Power: 413 Notice my Bypass Valve on the intake. If water gets sucked up in the intake it will be spit back out and not taken into the throttle body.
Many people will argue against me on this one so its up to you. I live in Charelston, SC.........we are below sea level and when it rains here all of the streets flood. I still like my CAI.
Many people will argue against me on this one so its up to you. I live in Charelston, SC.........we are below sea level and when it rains here all of the streets flood. I still like my CAI.
Tell me what you don't like about yourself....
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (12)
Joined: Oct 2002
Posts: 12,576
Likes: 0
From: Columbia, SC, USA
Rep Power: 413
Quote
[hr]Originally posted by: civicvtec1ps
i like INJEN SRI [IMG]i/expressions/face-icon-small-tongue.gif[/IMG][hr]
[hr]Originally posted by: civicvtec1ps
i like INJEN SRI [IMG]i/expressions/face-icon-small-tongue.gif[/IMG][hr]
Search and Learn
iTrader: (34)
Joined: May 2002
Posts: 14,004
Likes: 0
From: 909, Socal
Rep Power: 432
Quote
[hr]Originally posted by: FlyRiceRacer02
It was only a matter of time until you or injencivic showed up with your useless dribble........LOL........just kidding[hr]
[hr]Originally posted by: FlyRiceRacer02
Quote
[hr]Originally posted by: civicvtec1ps
i like INJEN SRI [IMG]i/expressions/face-icon-small-tongue.gif[/IMG][hr]
[hr]Originally posted by: civicvtec1ps
i like INJEN SRI [IMG]i/expressions/face-icon-small-tongue.gif[/IMG][hr]
INJEN
Tell me what you don't like about yourself....
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (12)
Joined: Oct 2002
Posts: 12,576
Likes: 0
From: Columbia, SC, USA
Rep Power: 413 Do you have an AEM CAI? Do you have the right size bypass?
There are 3 different sizes of bypass that AEM makes.
ALso, on my CAI the 2 pipes were different sizes so it will only fit on the upper pipe. I cut it like the directions say and placed it in there.
There are 3 different sizes of bypass that AEM makes.
ALso, on my CAI the 2 pipes were different sizes so it will only fit on the upper pipe. I cut it like the directions say and placed it in there.
Premium Member
Joined: Oct 2001
Posts: 3,860
Likes: 0
From: Alabama, US
Rep Power: 0
Quote
[hr]Originally posted by: FlyRiceRacer02
[hr]
[hr]Originally posted by: FlyRiceRacer02
Hey, that's my pic. But I don't have that strut bar any more. No matter how I tightened it the bar itself would vibrate and the left side bracket was awful close to a brake line (I think) so I got a Neuspeed bar from Tornative and took care of all those little problems.
Attachments:
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] Filter small.jpg (27 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] FIPK Tube0003.jpg (29 Kb)
[IMG]/forums/themes/orbitz/paperclip.gif[/IMG] Motor sm.jpg (29 Kb)
Tell me what you don't like about yourself....
Hey! Look At Me!! I'm a Supporting Member!!
iTrader: (12)
Joined: Oct 2002
Posts: 12,576
Likes: 0
From: Columbia, SC, USA
Rep Power: 413
Quote
[hr]Originally posted by: Bartkat
Hey, that's my pic. But I don't have that strut bar any more. No matter how I tightened it the bar itself would vibrate and the left side bracket was awful close to a brake line (I think) so I got a Neuspeed bar from Tornative and took care of all those little problems.[hr]
[hr]Originally posted by: Bartkat
Quote
[hr]Originally posted by: FlyRiceRacer02
[hr]
[hr]Originally posted by: FlyRiceRacer02
Hey, that's my pic. But I don't have that strut bar any more. No matter how I tightened it the bar itself would vibrate and the left side bracket was awful close to a brake line (I think) so I got a Neuspeed bar from Tornative and took care of all those little problems.[hr]
anyone know how da ebay strut bar fit over the FIPK??? I heard you had to do some tweaking for it to fit. Oh yah, I also have the FIPK. Its been working well for me. Funny thing wen i got it is that da day before i got it, it was raining hard in kali (go figure) and there is this huge dip flooded with water I have to go through just to get home. I told myself, dang!!! I am so glad I got an SRI rather than the AEM CAI. My the water that intake would have sucked in so much water.
Premium Member
Joined: Oct 2001
Posts: 3,860
Likes: 0
From: Alabama, US
Rep Power: 0
Quote
[hr]Originally posted by: CdKoInU
anyone know how da ebay strut bar fit over the FIPK??? I heard you had to do some tweaking for it to fit. Oh yah, I also have the FIPK. Its been working well for me. Funny thing wen i got it is that da day before i got it, it was raining hard in kali (go figure) and there is this huge dip flooded with water I have to go through just to get home. I told myself, dang!!! I am so glad I got an SRI rather than the AEM CAI. My the water that intake would have sucked in so much water.[hr]
[hr]Originally posted by: CdKoInU
anyone know how da ebay strut bar fit over the FIPK??? I heard you had to do some tweaking for it to fit. Oh yah, I also have the FIPK. Its been working well for me. Funny thing wen i got it is that da day before i got it, it was raining hard in kali (go figure) and there is this huge dip flooded with water I have to go through just to get home. I told myself, dang!!! I am so glad I got an SRI rather than the AEM CAI. My the water that intake would have sucked in so much water.[hr]
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
mistermenphis22
Mechanical Problems/Vehicle Issues and Fix-it Forum
5
Apr 3, 2016 08:06 AM
chgofirefighter
Archive - Vehicles for Sale/Wanted
0
Apr 18, 2015 08:08 PM
