Rep Power: 0

My 93 civic hatchback clutch doesn't have much pressure at all. It does release back after engaged, except right after bleeding it for a couple pumps. I tried bleeding the line with the slave cylinder and had no air bubbles coming out, just liquid that looks clean. The slave cylinder also squeaks as the clutch is engaged. I moved away the protective rubber boot and tried seeing if there was any liquid that would come out of the line connecting to the slave cylinder--nothing. Can't put into gear when car is on and can when car is off.

Any suggestions?

 
Rep Power: 0

Bleed the master cylinder with this. Connect the power bleeder to the clutch master cylinder reservoir with a cap from the junk yard or make one with a pvc cap from a hardware store. Done deal. You likely have air in your line.

 
Rep Power: 0

Thanks for the suggestion. I appreciate the time