I :sad face:
Yes, very sad face, indeed...
The day started well. I had been scheduled a 12 hour shift at work. But, thanks to some slick talking, had been able to cut that in half. Beautiful day for an outing. So, I pack up the girlfriend, and the baby. And, we're off to the park...or so we thought.






<I know, I know...
Not a day stopper. But, still. Not very good at all. Ya see. The neighbor boy(30yr old 350lbs by the name of 'BIGJESSE'[on the license plate]) had decided to park his 70 something mecury grand marquis half way in the street.
Now, it was partly my fault. Being the person I am, I stupidly believed others knew how to park. So, didn't really pay much attention while backing out. However, at idling speed. I would've hoped for a lot less damage. Of course, his car is made of metal, so there was not even a rub on it..
Still went to the park. Just had her laughing silently the whole time (I can't believe you crashed your car..he, he, he) So, now comes time to fix this. I went out a few minutes ago, and I can't bend it out by hand. Cannot afford shop work. Thinking about a hammer. Just wanted to get some suggestions first.
Any help is appreciated! Thanks, guys!
The day started well. I had been scheduled a 12 hour shift at work. But, thanks to some slick talking, had been able to cut that in half. Beautiful day for an outing. So, I pack up the girlfriend, and the baby. And, we're off to the park...or so we thought.
<I know, I know...Not a day stopper. But, still. Not very good at all. Ya see. The neighbor boy(30yr old 350lbs by the name of 'BIGJESSE'[on the license plate]) had decided to park his 70 something mecury grand marquis half way in the street.
Now, it was partly my fault. Being the person I am, I stupidly believed others knew how to park. So, didn't really pay much attention while backing out. However, at idling speed. I would've hoped for a lot less damage. Of course, his car is made of metal, so there was not even a rub on it..
Still went to the park. Just had her laughing silently the whole time (I can't believe you crashed your car..he, he, he) So, now comes time to fix this. I went out a few minutes ago, and I can't bend it out by hand. Cannot afford shop work. Thinking about a hammer. Just wanted to get some suggestions first.
Any help is appreciated! Thanks, guys!
Kenny the Ricer
iTrader: (1)
Joined: Oct 2009
Posts: 5,580
Likes: 0
From: In your trunk
Rep Power: 292 










Re: I :sad face:
Ouch, that really blows
The damage looks too deep to just push out by hand at this point
But I would at least try to remove the rear bumper and somehow force it to pop back out
If that fails, at least you have the bumper off, just take the bumper to the shop, you pay a little less for labor
Personally, I would take off the bumper, clean out the inside of debris, then take it indoors (carpeted area), while wearing socks, try to step on the inside to pop it back out.
The damage looks too deep to just push out by hand at this point
But I would at least try to remove the rear bumper and somehow force it to pop back out
If that fails, at least you have the bumper off, just take the bumper to the shop, you pay a little less for labor

Personally, I would take off the bumper, clean out the inside of debris, then take it indoors (carpeted area), while wearing socks, try to step on the inside to pop it back out.
Re: I :sad face:
ehh evan if you manage to pop the dent out it will never really look the same i would just buy a new bumper cover either from ebay or certifit.com and have it painted it shouldn't cost more then 300-350 bucks certifit.com after market bumper cost around 80-100 dollars. having something like that on my car would literally drive me crazy.
Re: I :sad face:
check this out now i know you can swap bumpers from a 2004 coupe onto a 2002 so im assuming you can do the same on sedans but im not 100% positive your going to have to ask around but if you can then check this out
http://cgi.ebay.com/ebaymotors/04-05...Q5fAccessories
http://cgi.ebay.com/ebaymotors/04-05...Q5fAccessories
Re: I :sad face:
That sucks. You can head gun it and pop it out or go to the junk yard and get one. I would get a 04,05 bumper if you can find one tho.
Edit: oh got ninja'ed by lowlife for the 04,05 part.
Edit: oh got ninja'ed by lowlife for the 04,05 part.
Re: I :sad face:
Yeah, it's definitely too deep to just push out. Which is crazy considering I was barely moving fast enough to even be considered drifting...I like the take it off and step on it idea...How hard will it be to rip off the back bumper? I would love to be able to replace it. But, that amount of money is pretty hard to come by in our current situation. Hopefully, I can heat it up a little and pop it back, at least close to original. I know it's not going to be perfect. But, anything is better than this.
Re: I :sad face:
yep just use a heat gun and heat up the inside of the bumber and push it out best as poss.you prob wont get it back to normal like said above but if you can manage to get it out a lil more than it is and then take it to a shop then it may be cheeper but for now stick wit the sad face.
Re: I :sad face:
Yeah, I'm definitely gonna stick with the sad face, for now. No heat gun, but a blow dryer should do the job, right? That one tab is broken. But, luckily, that's the only broken one, so the rest should still snap into place.
I'm a little busy with work this week. So, hopefully this weekend, I'll have some time to pull the bumper off and take care of enormous eye-sore.
I'm a little busy with work this week. So, hopefully this weekend, I'll have some time to pull the bumper off and take care of enormous eye-sore.
Re: I :sad face:
So...it definitely took longer to do then I had expected. I've had it done for prolly a week now, and just remembered that I hadn't put up any completion pictures....




It didn't turn out too bad. You can still see there was some damage there...But, unless you're looking for it, you really only see the paint.


It didn't turn out too bad. You can still see there was some damage there...But, unless you're looking for it, you really only see the paint.
Re: I :sad face:
It went nice and smooth..2 10mm bolts, 4 phillips head screws, and 2 tabs. Yanked it off in less then 10 minutes...Took the hair dryer to it for 5-7 minutes just to heat it up nicely, sat it on a blanket on my living room floor, and just pushed it out with my foot.
It is definitely better looking then that fugly *** dent!
It is definitely better looking then that fugly *** dent!
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 










Re: I :sad face:
if you decide you want a new bumper, ive seen painted aftermarket bumpers on ebay for around $200 shipped. i have one and it fits great.
Re: I :sad face:
I would love to be able to get a new one. But, I am no where near financially able to put out $200 for something that "isn't broken", even though my heart still is, lol..
Drove the wife's car home last night, so I had the opportunity to be behind the civic. I couldn't even tell the dent was there until I got right on her ***. So, I guess I'm just gonna tough it out. Since tax time is the next time I plan on seeing expendable income, I suppose she's at least there for the winter.
Drove the wife's car home last night, so I had the opportunity to be behind the civic. I couldn't even tell the dent was there until I got right on her ***. So, I guess I'm just gonna tough it out. Since tax time is the next time I plan on seeing expendable income, I suppose she's at least there for the winter.
Re: I :sad face:
You can add a little bit of touch up paint on the black and see if you can blend it in. You know your going to replace the bumper so even if it doesnt look perfect no big deal because at least it will hide the black
Re: I :sad face:
Hate to point out the pointless things in this thtead... First post u mentioned u "packed up the girlfriend" then u mentioned that u drove the wife's car. No wonder the funds are low, one girl is expensive enough! 
All joking aside... U def fixed that bumper well. A lil touch up paint like they said aboveand no onewill notice. Well, u will always see it regardless

All joking aside... U def fixed that bumper well. A lil touch up paint like they said aboveand no onewill notice. Well, u will always see it regardless
Re: I :sad face:
Heh, heh, heh...Yeah...no official marriage, yet. But, the cars, the house, the baby, everything else is in both of our names, so it's close enough. Thanks for pointing out my inconsistencies, though...dick. 
I don't think I did too bad. I think that by me waiting so long to try to pop it off the dent kind of formed itself into the bumper. I got most of it out, but there is still a shallow spot where the dent was.
That little tiny crease is the worst part of it, now. I tried forever on that. But, it wasn't going anywhere.

I don't think I did too bad. I think that by me waiting so long to try to pop it off the dent kind of formed itself into the bumper. I got most of it out, but there is still a shallow spot where the dent was.
That little tiny crease is the worst part of it, now. I tried forever on that. But, it wasn't going anywhere.
Re: I :sad face:
Atleast it was a plastic portion of the car, I wasn't so lucky with my last mishap. My buddy had his R6 parked behind me. He needed to move his bike from the street into the driveway and we both thought it'd be the perfect time for me to learn how to ride his motorcycle. After a crash course in shifting I throttled up. I managed to maneuver from behind the car to the side of they car... I panicked and released the throttle causing me to lose momentum and I laid his R6 into the side of my Civic (rear panel behind the gas tank).
One of the worst moments I have had with my em2! Strange thing was, when I managed to get his bike up off the asphalt people came by to ask of we were selling the bike... We were both WTF!
We used polishing compound to get his blue off of my red but the dent is still there. It sure cured my itch to get a bullet bike... hehe
One of the worst moments I have had with my em2! Strange thing was, when I managed to get his bike up off the asphalt people came by to ask of we were selling the bike... We were both WTF!
We used polishing compound to get his blue off of my red but the dent is still there. It sure cured my itch to get a bullet bike... hehe
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
nrp1000
Mechanical Problems/Vehicle Issues and Fix-it Forum
11
Jan 19, 2016 06:46 PM
asc070
Archive - Canada Forsale/Trade eh?
0
Mar 17, 2006 01:17 PM






