Whats better?
Thread Starter
Registered!!
iTrader: (2)
Joined: Apr 2007
Posts: 2,018
Likes: 2
From: New York
Rep Power: 253 
Whats better?
Hey I just got some new OEM fogs (glass) and I want to make them yellow. What would be the best way to do that? Should I use the yellow spray stuff that they sell, or should I laminate them with that laminate? Im thinking the spray will be the best bet, let me know what you guys think!!
Registered!!
iTrader: (8)
Joined: Dec 2006
Posts: 3,091
Likes: 0
From: We are Anonymous!
Rep Power: 329 Re: Whats better?
Sell them to me, then you can get the Yellow fogs from Passwordjdm. They are yellow glass fogs. I had them, loved them, hated it when someone ran into me and broke them.
Thread Starter
Registered!!
iTrader: (2)
Joined: Apr 2007
Posts: 2,018
Likes: 2
From: New York
Rep Power: 253 Re: Whats better?
This is why I decided to either spray or laminate them. I think im going to try the bulbs first and see how that goes. 
Joined: Sep 2002
Posts: 51,241
Likes: 20
From: NV
Rep Power: 812 Re: Whats better?
oem is clear plastic. if you want, try some krylon stain glass paint in yellow and spray a few coats. it will hold up to the heat just fine. can find it at michael's craft store.
