Rep Power: 0

Hello all, I have recently offered to install a set of fog lights identical to the set that was posted on here from e-bay. I installed them exactly how it was pictured in the post which by the way was very helpful. My problem is of course they do not work. I only have a test light to work with for trouble shooting. I only get power on one leg out of 4 (its 1 of the 2 green ones) of the wiring comming into the relay and no power on the leads to the green connector that hooks into the actual on off switch. My question is should I not have power on both legs into the relay, the other 2 (black wires) are grounds? Also should I not have power comming into the on off switch? Thanks for everyones help.