need stock ride hide measurments
Thread Starter
Registered!!
iTrader: (7)
Joined: Dec 2004
Posts: 561
Likes: 0
From: Belgium
Rep Power: 268 
need stock ride hide measurments
Can some one with stoch suspension and wheels tell me the lenght from center of the wheel
till the edge of the fender? Need those measurments for car inspection dont
ask why some stupid rules wen lowering the car. hope someone can tell me.
thx in advance
till the edge of the fender? Need those measurments for car inspection dont
ask why some stupid rules wen lowering the car. hope someone can tell me.
thx in advance
Registered!!
iTrader: (4)
Joined: Jun 2006
Posts: 207
Likes: 0
From: Grand Junction, Co
Rep Power: 245 Re: need stoch ride hide measurments
Wow, where did you learn to spell? It took me a few times of reading this to figure out what you wanted. Maybe people would be able to help you if you fixed your spelling
Registered!!
Joined: Jul 2007
Posts: 263
Likes: 0
From: calgary
Rep Power: 232 Re: need stoch ride hide measurments
posting your type of car would really help this thread.
wait i don't know if you can read that or not, ill type it again for you
potsing a p!c of yer kar mai halp this thaerd git sum hitzz
wait i don't know if you can read that or not, ill type it again for you
potsing a p!c of yer kar mai halp this thaerd git sum hitzz
Registered!!
Joined: Mar 2007
Posts: 305
Likes: 0
From: Western Washington
Rep Power: 237 Re: need stoch ride hide measurments
LOL you guys are dicks I dont think english is his first language. I also believe he has a 7th gen, correct me if im wrong. If it took you more than two extra nano seconds to read that then you are the retarded ones.
Registered!!
Joined: Mar 2007
Posts: 305
Likes: 0
From: Western Washington
Rep Power: 237 Re: need stoch ride hide measurments
Okay the front is 38 cm and the rear is 36 cm approximately. This is from the center of the wheel to the fender measuring up(which i assume is what you wanted). This is on a USDM EM2
Last edited by wheelspinLX; Jan 29, 2008 at 07:00 PM. Reason: left out info
Thread Starter
Registered!!
iTrader: (7)
Joined: Dec 2004
Posts: 561
Likes: 0
From: Belgium
Rep Power: 268 Re: need stoch ride hide measurments
sorry guys my bad . It was late yesterday and early this morning.
Here is what car;EM2 ex 04
fot those here is the dutch version
sorry gasten mijn fout. Het was laat gisteren en vroeg deze morgen.
Hier is welke type auto.
laters
thx
Here is what car;EM2 ex 04
fot those here is the dutch version
sorry gasten mijn fout. Het was laat gisteren en vroeg deze morgen.
Hier is welke type auto.
laters
thx
Last edited by DaRk_MauL; Jan 30, 2008 at 07:38 AM.
Thread Starter
Registered!!
iTrader: (7)
Joined: Dec 2004
Posts: 561
Likes: 0
From: Belgium
Rep Power: 268 
Thread Starter
Registered!!
iTrader: (7)
Joined: Dec 2004
Posts: 561
Likes: 0
From: Belgium
Rep Power: 268 Re: need stoch ride hide measurments
hehe lol no clint its for car inspection.Ill try explaining it in my best englisch.
If ya buy a new car you are alowed to drive it for 4year before it need to
be inspected.so sinds alot of people are tuning and upgrading there cars they made all these silly rules. What ya can and cannot do to your car.
Lowering you car is allowed BUT you may not place them yourself, you need
a paper from the dealer who put them on your car. with those begin nr with
norrmal suspension and then the height lowered. Then the dealer who installed your suspension (lets say KW) wil send them a certificate that those
springs and shock are realy made for my model,year,........ wen i have all these paper i can go off to the car inspection.there for i needed those
measurement.
The stupid thing is that not all suspesion dealers give or have those certificates.Just like my AP lowering springs.Tommorow ill be taking them
of and putting my new KW v2 underthere. they come with E-inspection
Never need to change those succkers for inspection.
Carbon not allowed
engine tuning ''
other swaybars ''
tinting front side windows
.................................
................................
................................
At the moment my car is back to stock. Hope you understand it.
BELGIUM SUCKS AT THAT POINT
grtz
ps;think i need to go back to school for my englisch writing.Its just that belgium already has
3 languages,englisch makes 4 and i dont write englisch alot.
If ya buy a new car you are alowed to drive it for 4year before it need to
be inspected.so sinds alot of people are tuning and upgrading there cars they made all these silly rules. What ya can and cannot do to your car.
Lowering you car is allowed BUT you may not place them yourself, you need
a paper from the dealer who put them on your car. with those begin nr with
norrmal suspension and then the height lowered. Then the dealer who installed your suspension (lets say KW) wil send them a certificate that those
springs and shock are realy made for my model,year,........ wen i have all these paper i can go off to the car inspection.there for i needed those
measurement.
The stupid thing is that not all suspesion dealers give or have those certificates.Just like my AP lowering springs.Tommorow ill be taking them
of and putting my new KW v2 underthere. they come with E-inspection
Never need to change those succkers for inspection.
Carbon not allowed
engine tuning ''
other swaybars ''
tinting front side windows
.................................
................................
................................
At the moment my car is back to stock. Hope you understand it.
BELGIUM SUCKS AT THAT POINT
grtz
ps;think i need to go back to school for my englisch writing.Its just that belgium already has
3 languages,englisch makes 4 and i dont write englisch alot.
Last edited by DaRk_MauL; Jan 31, 2008 at 08:10 AM.
Registered!!
Joined: Dec 2007
Posts: 9
Likes: 0
From: Germany
Rep Power: 0 
Re: need stoch ride hide measurments
hey DaRk_MauL
do you speak german?i have the same problem with the german TÜV!
you can download the certification from kw on www.kwgmbh.de
der scheiss tüv kotzt mich auch an.
do you speak german?i have the same problem with the german TÜV!
you can download the certification from kw on www.kwgmbh.de
der scheiss tüv kotzt mich auch an.
Thread Starter
Registered!!
iTrader: (7)
Joined: Dec 2004
Posts: 561
Likes: 0
From: Belgium
Rep Power: 268 Re: need stock ride hide measurments
who knows a good translating progie? like
clint says i can understand and read german,dutch,french and englisch but because off verry less writing those languages, alot of it got lost.
clint says i can understand and read german,dutch,french and englisch but because off verry less writing those languages, alot of it got lost.
Super Hoser
Joined: Aug 2002
Posts: 1,184
Likes: 0
Rep Power: 301 Re: need stock ride hide measurments
i made measurements of my ride height last year before i changed out the suspension
if i remember correctly, it was 26" all around...that was measured from the ground to the fender arch...this was on a 5 yr old civic coupe si (same as USDM EX coupe)
btw, why do you want the measurements from the center of the wheel? isn't it easier to just measure it from the ground?
if i remember correctly, it was 26" all around...that was measured from the ground to the fender arch...this was on a 5 yr old civic coupe si (same as USDM EX coupe)
btw, why do you want the measurements from the center of the wheel? isn't it easier to just measure it from the ground?
Last edited by turboslug; Feb 2, 2008 at 04:01 PM.
Thread Starter
Registered!!
iTrader: (7)
Joined: Dec 2004
Posts: 561
Likes: 0
From: Belgium
Rep Power: 268 Re: need stock ride hide measurments
because inspection wants the height
measured from center of the wheel till the fender.I dont know why but i know they do come up with some strange rules.
measured from center of the wheel till the fender.I dont know why but i know they do come up with some strange rules.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
Wankenstein
Mechanical Problems/Vehicle Issues and Fix-it Forum
8
Jul 12, 2015 11:54 AM
BootyDo
Wheels, Tires & Brakes Modifications
2
Jul 7, 2015 06:06 AM
7thgensurvivor
Archive - Wanted Parts (WTB's)
2
Jul 5, 2015 12:17 PM
