Rep Power: 0

i've searched and searched... no one seemed to have the same problem that i'm having with ebay fogs. on the directions, it says to connect 10 pin connectors to the vehicle's 10 pin connectors. some ebay fogs don't have 10 pin connectors, mine does NOT. all i have is a four pin connector. on my switch harness, i have the fuse, constant power, a ground, the relay, 4 pin connector, and the foglight switch. my question is.. what do i do with the 4 pin connector?

 
Rep Power: 0

Yea bud, I had the exact same problem. I posted a forum on it and no one knew what to do. So I just said screw i and I used a switch I had laying around the house and connected them directly to the battery. As far as I know there is still no solution.

http://www.7thgencivic.com/forums/sh...=281193&page=3
Look about half way down on that page and that's how mine looks.

 
Rep Power: 282

that kinda sux...i was looking into getting some fogs too. so is the 4 wire connector spliced into the harness with the other wires or is it 4 completely separate wires...like maybe it should connect to a relay of some sort?

 
Rep Power: 0

the 4 pin connector is spliced into the harness

 
Rep Power: 0

Yea it almost seemed like they just forgot to put the extra connector on the harness

 
Rep Power: 0

yeah.. thats exactly what they did. i have a 4 pin connector, and no where to put it.
so how did you wire up your switch??

 
Rep Power: 282

lol, sucks....i saw some fogs on ...procivic.com(? - there was a banner at the top of the page..i couldn't resist ) the other day. could it be possible they are the same product. don't want to buy crap with known defects if possible.

 
Rep Power: 0

i have no idea. i just looked at them and theres no pictures of the harnesses. thats the only way i could tell

 
Rep Power: 0

I used most of the harness they sent (laziness). So each foglight was already grounded, so I just took a switch I had laying around, run a wire off the battery to the switch and connected the switch the power wires of the fogligts. Extremely simple, and I can run my foglights with my high beams on....

 
Rep Power: 0

Well, to tell ya the truth, it would be hard to tell. I would think that it would probably have everything you would need since it is from a credited website. Maybe see if anyone else on the forum has bought from them.

 
Rep Power: 0

i just have to clear something up real quick.. so the 4 pin connector that i have on my harness is used mainly for power??

 
Rep Power: 0

If I remember correctly, i believe the 4 pin is the main power supply, but you have to have the 10 pin to tell it when to turn on (ie. when low beams, but not when high beams, etc.). I could be wrong though.

 
Rep Power: 0

so do you think it would work if i lengthened the wire on the 4 pin connector and connect it to the battery??

 
Rep Power: 0

No. I don't know how you would do it.

 
Rep Power: 266

i have this same problem...I hate life ..ROFL !!