Pics of Undercar Neon Mounting...?
Thread Starter
Registered!!
Joined: Oct 2001
Posts: 863
Likes: 0
From: Tucson, Arizona, US
Rep Power: 0 
Pics of Undercar Neon Mouting...?
Hey guys, I was wondering if those of you who have underbody neons had pics of where and how you mounted them. I am getting mine within a week and would appreciate any help/tips. Thanks.
You asked, and yee shall recieve...

Front bumper removed... neon mounted on the bottom of the front bumper impact beam... and under splash guard

Neon mounting ties screwed directly into underbody.

Front bumper removed... neon mounted on the bottom of the front bumper impact beam... and under splash guard

Neon mounting ties screwed directly into underbody.
nope... never put one on the back...
but I have seen a coupe that did his thru the tow hook.
It looked pretty nasty from the back when it was on, because the tube was showing.
But you could probably put black electrical tape on the outside part to keep it from showing.
Good luck
but I have seen a coupe that did his thru the tow hook.
It looked pretty nasty from the back when it was on, because the tube was showing.
But you could probably put black electrical tape on the outside part to keep it from showing.
Good luck
ph0ng appears to have the oh so desired streetglow kit, can't tell what line tho. my brother had a liteglow kit installed by a couple morons and it started to fall apart on him, i'll have pics for you all in a few days, i hope.
Thread Starter
Registered!!
Joined: Oct 2001
Posts: 863
Likes: 0
From: Tucson, Arizona, US
Rep Power: 0 
How much did you get yours for? I got my LiteGlow Pro-series on eBay for $105 shipped. I went with the LiteGLow cuz Derek said that it was actually better than the more expensive StreetGlow....
1. I do remember D saying that about the street glows... and probably agree with him...
Price... don't think I spent more than $130 for the complete kit.
2. Switch wiring... I ran the main power wire from the battery, thru the firewall and into an area behind my glove box. I also ran all the Neon wires thru the same place on the firewall into the same place behind the glove box to the power distro box. Then used a switch between the battery power and the distro box.
But the switch I used was the OEM fog light switch. Had to buy at the dealership for a nice chunck of $$
I posted a diagram for another thread a while back...
The Link
Price... don't think I spent more than $130 for the complete kit.
2. Switch wiring... I ran the main power wire from the battery, thru the firewall and into an area behind my glove box. I also ran all the Neon wires thru the same place on the firewall into the same place behind the glove box to the power distro box. Then used a switch between the battery power and the distro box.
But the switch I used was the OEM fog light switch. Had to buy at the dealership for a nice chunck of $$
I posted a diagram for another thread a while back...
The Link
2k1civic.com O. G.
iTrader: (2)
Joined: Jun 2001
Posts: 3,165
Likes: 0
From: PhILLy, Pennsylvania, US
Rep Power: 335 

in your diagram ph0ng is it ok to wire all 4 power sources of the neon to that one prong (blue)? and all 4 negative grounds to the last two (green)? and the constant 12v (red).. you can just tap that into the big white wire ?
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
ricer_em2
Mechanical Problems/Vehicle Issues and Fix-it Forum
2
May 11, 2016 08:09 PM
TheRiddicles
8th & 9th Generation Civic 2006 - 2015
2
Sep 21, 2015 03:34 PM
TheRiddicles
Suspension Performance Modifications
0
Sep 21, 2015 01:28 AM




