switch install, need help
Thread Starter
Registered!!
Joined: Feb 2002
Posts: 57
Likes: 0
From: Newbury, Ohio, US
Rep Power: 0 
switch install, need help
i went to radio shack today and got an illuminated rocker switch. it has the three prong setup. it is for one neon on my subs. my question is how do i wire this to be always on. i hooked it up and it is not switching or anything. basically i have no idea how to do it. i just connected 2 positives to the switch but the neon is always on now. help please
Registered!!
Joined: Oct 2001
Posts: 282
Likes: 0
From: Roseville, California, US
Rep Power: 0 probably wired it backwards...
The package should have a diagram for how to wire the switch.
w/ illumated switches with single leads, the middle is always +12v constant from battery. Then one side is ground, and the other side is your switched + wire for your application...
and the switch is either on or off... not like an A/B switch.
Make sure you don't have any wires crossing.
The package should have a diagram for how to wire the switch.
w/ illumated switches with single leads, the middle is always +12v constant from battery. Then one side is ground, and the other side is your switched + wire for your application...
and the switch is either on or off... not like an A/B switch.
Make sure you don't have any wires crossing.
Thread
Thread Starter
Honda Civic Forum
Replies
Last Post
SuperEF
1st - 5th Generation Civic 1973 - 1995
3
Jun 24, 2015 11:53 PM
brian257
Mechanical Problems/Vehicle Issues and Fix-it Forum
7
Jun 4, 2015 08:17 PM
nickfn
General Honda Civic Forum Archive.
5
Nov 8, 2001 09:44 AM
