Rep Power: 332

Alright i took out the two screws behind the lil piece of plastic and then i disconnected the power lock connector. Now left is the thing thats connected to the actual handle, how do you detach it? somehow push that black piece of plastic or do you disconnect it someother way. My fingers cant push the lil plastic clip out.... [IMG]i/expressions/face-icon-small-sad.gif[/IMG]

 
Rep Power: 0

that is easy....take a screwdriver and push the plastic clip off...then take ur screw driver again and just push up on the metal rod and BOOYA u are done

 
Rep Power: 0

wait what are you doing???

 
Rep Power: 332

<< that is easy....take a screwdriver and push the plastic clip off...then take ur screw driver again and just push up on the metal rod and BOOYA u are done >>



k thanks!! i was just afraid if i pushed up on the metal rod that the rod would swing back in and i wouldnt be able to get it out to attach it back on....i'll try it when i get home!!

 
Rep Power: 0

Wait how did you get the actual doorhandle square off? Pry a screwdriver under it?

Randy

 
Rep Power: 318

while we're on the doorhandle subject, is there any way to rig it so the door unlocks when you attempt to open it from the inside with the door locked? I've always enjoyed that feature. at least on the driver side door.

 
Rep Power: 0

I agree with mexieus - it has gotten kinda annoying having to unlock the door to get out and usually I unlock both doors just cause I use the power lock switch since its so much easier and I dont want the passenger door unlocked all the time

also -
is there a way to make it so I dont have to hold the handle up to lock it without the remote? sometimes I warm up my car and relock it and when its cold I dont want to stand there and mess with the door

 
Rep Power: 318

I'm hoping there is some way to mod the door to do that stuff. I'm too chicken to look into it myself, I'll let someone else mess with their car and figure out how to do it [IMG]i/expressions/face-icon-small-smile.gif[/IMG]

 
Rep Power: 332

arg still need some real help! that rod thats still connected to the door handle...what do i do to get it detached? i dont wanna break something and not be able to put it back together.