Rep Power: 0

Sup fellas, I need someone who can post a detailed, serious response to this question. I am planning on getting the SF Turbo, hopefully by spring. I want to know, what else should I add, to make this work good without blowing my motor up. Plug + Plays? I will be adding a chip once I do the turbo, and I will have the BOV installed on the turbo before shipping. IS there anything else I should do to my motor so the turbo doesnt wear it out? Pistons....valves, etc etc.

Basically Im asking someone for advise on what I should do to my motor, without going overboard, and not destroying my motor. Im new to modding so, but not new to working on cars so, I have some background, just not with the imports etc. Im doing the full suspension currently, and have an exhaust system etc. So, if someone could let me know how I should go about modding my car, please post, if not, dont please, only serious responses from people that know what they are talking about, thank you. If you'd rather email me: snakeeyes_modz@yahoo.com

Thanx fellas/gals.

 
Rep Power: 327

gauge pod to hold ur gauges
mechanical boost gauge
electric oil pressure gauge
electric fuel pressure gauge
bigger injector or more injectors
greddy emanangement system or vafc(vtec) or safc(non-vtec)
lighten flywheel
clutch

im still new to this turbo thing but thats some things you will need

 
Rep Power: 0

you'll need a boost controller as well...

ummm..might wanna move this to forced induction

 
Rep Power: 387

ok did I miss something I was under the influence that if my ecu was chipped I would not need a controller as long as it was nothing over the limited 7psi I believe ...