Rep Power: 0

Ok any input would be greatly appreciated!!!!!

Had a low beam bulb blown on the pasenger side....replaced it and it works fine......couple of minutes later the driver side go very dim ....low beam on....but dim and the high beam on but dim as well (just like having the daytime lights on)

Replaced a blown out bulb on the passenger side and everything works perfectly fine again. But on the driver side the high beam light is partically on same with the night time light!!!!

I switched all bulbs and still the same thing. All the lights on the passenger side work perfectly fine (high beam and low beam) but on the driver side both lights only light up slightly. The high beam dont come on when truned on and with the low beam light on the high beam lights up as if i just had the dat time running lights on.

This is the first type of problem like this i encounter so any help would be greatly appreciated

Any suggestion????

If so can you get back to me ASAP plz. Send me a PM or email me at stevecroke@roadrunner.nf.net

Tanx

Steve

 
Rep Power: 0

check the fuses.. i had a similar problem with my projectors

 
Rep Power: 0

You need to put a larger fuse in if you are using xenon bulbs

 
Rep Power: 0

fuses and check all wiring harnesses, i've had one melt on me... that's not your problem, but just check those too.

 
Rep Power: 0

yup just had that last week..it was a fuse...

 
Rep Power: 0

thanx guys

it was a fuse the was gone......i over looked the simplest thing

 
Rep Power: 359

That's always how it is. You're soo worried about it not working that if it doesn't work, then it's automatically a huge problem.

 
Rep Power: 0

Any idea how to fix the fuse then???

 
Rep Power: 0

the fuse box in the left of the engine bay, look under the cover to see what all the fuses are for... just switch out the busted one for a new one... honda also included a nice dandy fuse puller and some extra fuses

 
Rep Power: 0

Nice one, your help is much appreciated I will attempt to fix it as soon as possible. Thanks again!

 
Rep Power: 0

i got the angle lights too, but somehow it is kinda messed up, does anyone know how to reseal it and what do i need to do, because inside the light there, like moisture and also kinda foggy! dont want to damage the light or anything please let me know....

and if you got any input on what strut bar to get with my car that would be great, right now i have short ram AEM intake in there, so gotta be compatible with that in there too!..... please email me at run83ton@hotmail.com if you can help me out with the angle light

 
Rep Power: 0

You can fix the fuse using aluminum foil. i did it ones to drive to pep boys to buy the fuse and replace the damage one.