Rep Power: 394

Before color mod:


After color mod:

 
Rep Power: 312

let see them on the car alan!

 
Rep Power: 394

Sorry it's taking so long. It's been raining here and there.

I just need to clean, aim, mount, then assemble every part back together.

 
Rep Power: 812

those look good!

 
Rep Power: 297

Damn! That is nice!

 
Rep Power: 0

are you up for hire if i ever needed a retro fit done??? hahaha


..seriously though.

 
Rep Power: 394

PM me, I'm down.

 
Rep Power: 394

Can a mod move this to lighting and into a sticky?

 
Rep Power: 352

ill move it alan but if you want it a sticky you got to use your points

 
Rep Power: 812

installed pics?

 
Rep Power: 394

I tried to give back to the community, but it denied me. hahah

vBulletin Message

The thread you are trying to sticky is in a forum that you are unable to sticky threads in.

 
Rep Power: 262

7thgenerasiancivic, I got tyc projector headlights right. If i want to put TSX project lens' instead of the TYC, is it fairly easy? I can take the existing tyc len's out and fit the TSX ones in, correct? How much time am i looking at to do that? thanks, lmk

 
Rep Power: 0

tsx lens will fit in to tyc but lots of work.....if u looking for easy retro then u need to buy Valeo D2s projectors.....they fits in almost like tyc projector only hve to make the lens holder hole bit bigger and thats all.....

 
Rep Power: 262

Isnt there different sizes of Valeo D2S lenses? which size do i need.

 
Rep Power: 0

as long as i know their only one size for valeo d2s projector from A4....if u can find one with ecode those are the best......

 
Rep Power: 812

check ebay for audi a4 projectors. i saw a full kit with all hardware, projectors/bulbs/ballasts for around $400.

 
Rep Power: 0

Very Nice!!! cleanest retro into stock housing I have seen.

 
Rep Power: 0

The beam looks a little low.....May be...

 
Rep Power: 0

how'd u waterproof the back of the headlight housing? did you just put back on the stock rubber seals?

I did the same retro but my shrouds are really ghetto so i'm gonna redo them when I have some free time. Where'd u get those range covers that curve in so much to cover the sides of the projectors?

 
Rep Power: 394

Used OE rubber seal

covers from ACE hardware

 
Rep Power: 0

ok so I'm going to send you my 04 coupe headlights and you're going to do this for me, right? PM a price if so All components supplied by U

 
Rep Power: 394

Here's another picture:


Ill take more shots once I get new bulbs.

 
Rep Power: 241

wow! great job, definatley OEM quality!

love the color and brightness

thanks for all the detailed pics aswell!

 
Rep Power: 0

how did u open the reflectors on the headlight?? or u cut them while it connected to the headlight?? Cuz im trying to remove the reflectors, so far i remove 2 screws and the third screw where it moves L/R, i can't get it open. any suggestion on that?

 
Rep Power: 812

um you dont mess with the adjustment screw. headlights have four bolts and two are underneath where you need to remove the bumper to even see em. then you can stick it in an oven on low heat to soften the goo and open the two halves.

 
Rep Power: 0

noo, im not asking how to remove the headlight, im asking to remove this...

 
Rep Power: 240

remove the aiming screws and the reflector pops out

 
Rep Power: 0

how u remove the aiming that does L/R, it doesn't have a screw.

 
Rep Power: 240

you may need to dremel it out

 
Rep Power: 812

yeah sedan has both adjustment and its as easy as unscrewing them. i think with others you need to make a hole or something idk. just be sure you can put it back so it holds the reflector