***HID TYC Retrofit***: Done Pics Page 4
Thread Starter
Banned
iTrader: (32)
Joined: Mar 2003
Posts: 8,407
Likes: 0
From: Long Island, New York
Rep Power: 0 
***HID TYC Retrofit***: Done Pics Page 4 Well... I got a pair of Valeo Projectors, These are ONLY used in Europe...
Last edited by ImPulse; Nov 30, 2003 at 09:51 PM.
Thread Starter
Banned
iTrader: (32)
Joined: Mar 2003
Posts: 8,407
Likes: 0
From: Long Island, New York
Rep Power: 0 
up-up-down-down-left-right-left-right-b-a-b-a-start
iTrader: (20)
Joined: May 2002
Posts: 7,785
Likes: 0
From: London, Ontario, Canada
Rep Power: 371 
Originally posted by ImPulse
friend... U can get them from www.HIDTech.com though
Remember this is an expensive addition... Haha
friend... U can get them from www.HIDTech.com though
Remember this is an expensive addition... Haha
BTW... how are you gonna mount the projector in the housing and still be able to adjust it?
Thread Starter
Banned
iTrader: (32)
Joined: Mar 2003
Posts: 8,407
Likes: 0
From: Long Island, New York
Rep Power: 0 ive got a couple ideas...
1) New mounting plate...
2) Cutting Valeo Projectors and JBWelding them onto TYC Adjusting Plate
3) Making diff holes, and being able to adjust
4) JBWeld the ****er in (wont be able to aim after) - = Bad LOL
1) New mounting plate...
2) Cutting Valeo Projectors and JBWelding them onto TYC Adjusting Plate
3) Making diff holes, and being able to adjust
4) JBWeld the ****er in (wont be able to aim after) - = Bad LOL
good job looking forward to it 
End Bringer
iTrader: (3)
Joined: Sep 2001
Posts: 6,254
Likes: 0
From: Fort Fatima, Florida, US
Rep Power: 0 i couldn't wait for the harness, so i powered up these bitches with my 5500k, the light may look odd because the base for the h1 was too small for it, so it wasn't sitting properly
i am still not sure how i am gonna do this, the thing is so big, it goes into the parking light's spot
first pic is high beam, 2nd pic is low beam
i am still not sure how i am gonna do this, the thing is so big, it goes into the parking light's spot
first pic is high beam, 2nd pic is low beam
End Bringer
iTrader: (3)
Joined: Sep 2001
Posts: 6,254
Likes: 0
From: Fort Fatima, Florida, US
Rep Power: 0 Originally posted by ImPulse
mine has more color
well, we with both compare after we finish our retrofitin 
mine has more color
well, we with both compare after we finish our retrofitin 
Thread Starter
Banned
iTrader: (32)
Joined: Mar 2003
Posts: 8,407
Likes: 0
From: Long Island, New York
Rep Power: 0 plasti-dipped my ballasts today 
I will be soddering the wires tomorrow, and then the headlights go on the car, then get aimed... Then i take em off, and fix the back of the housing since i tore it apart (I dont need these things fogging up on me), I will silicone it 100%! and then they will be on my car hopefully on wed if not thursday (: Then i lose my car for 2 days cause they need to fix the fender and front bumper.... After that I WILL BLIND U ALL 
I will be soddering the wires tomorrow, and then the headlights go on the car, then get aimed... Then i take em off, and fix the back of the housing since i tore it apart (I dont need these things fogging up on me), I will silicone it 100%! and then they will be on my car hopefully on wed if not thursday (: Then i lose my car for 2 days cause they need to fix the fender and front bumper.... After that I WILL BLIND U ALL 
Second Place is the First Loser
iTrader: (1)
Joined: Oct 2001
Posts: 4,469
Likes: 0
From: San Antonio, Texas, US
Rep Power: 344 actually you should be blinding anybody cause you got the right projectors and will be aiming them right so the cuttoff will be just under blinding..... so you should say that you will be almost blinding us all
Joined: Jan 2003
Posts: 9,137
Likes: 1
From: Ontario
Rep Power: 380 I retrofitted Audi s4 HID's into my Sonar projecters on my 03 'vic. I removed the Halo over the low beam and put it over the high beam with 2 upgraded T1 LED's (much brighter). DOT standards say that your cutoff line with HIDs should be no more than 2 inches below or above the height of the center of bulb itself at a distance of 25 feet away. If you are within those guidelines, you're legal. Just park 25 ft from a wall and go from there. Wait till you see what they do to freeway signs.
Thread Starter
Banned
iTrader: (32)
Joined: Mar 2003
Posts: 8,407
Likes: 0
From: Long Island, New York
Rep Power: 0 lol, ive been done for a couple of days
Only thing is i broke a plate =\ so the passenger headlight cannot be aimed correctly. Im opening up another projector and stealin the plate so everything will be perfect
Ill post pics later tonight... Just remember its not aimed correctly, Haha
Only thing is i broke a plate =\ so the passenger headlight cannot be aimed correctly. Im opening up another projector and stealin the plate so everything will be perfect
Ill post pics later tonight... Just remember its not aimed correctly, Haha
