Swap roll call and list mods
 

Im just vurious to see how the swaps are comin along. This forum has plenty talk about turbos but not enought on swaps. Id like to see anotherslone's mods. It must be a page long.any ways heres what i got

'03 Kduba3
AEm CAi
Hondata flash
rsx five lug
rsx R 421 header
rsx s brakes rear
Stop tech SS lines
Stop-tech bbk
axis ultimate pads
New Line products camber kit
Tein SS coilovers
Rsx R gauge cluster conversion
rsx s shift know
short shifter
oem front lip
rs sides
es mm inserts
momo seats and sliders
stripped trunk(no sounds deading)
17" bronze wheels
yoko avs sports 225/45/17
grounding kit
pioneer HU
jl front components
MbQ rear 6x9's
Si battery mount
custom battery tie down
type s shift knob

Still on the way
6speed tranny
custom sway
Si steering wheel

K20A3 swap hasport motor mounts, wire harness, stage 2 swap axles, Greddy RSX Type S turbo kit, and currently in the shop having the K-pro instaled and dyno tuned.

K20A2
Hasport mounts
Hasport harness
RSX-S Axles
RSX-S 5 lug brakes
RSX-S Wheels
Rota Slipstreams 16x7 5x114.3 45 offset with Falken Azenis 215/45/16s for racing
RSX-S black leather seats (don't like them anymore, starting to crack :mad: )
Injen SRI
Skunk2 Cat-back
Progress rear sway bar with tie bar
Neuspeed front strut tower bar
Ingalls rear camber kit

Coming soon:

Ground Control coilovers with Koni yellows
Jackson Racing header with Carsound cat
Some sort of hondata flash (must...lower...vtec...engagement!)
and a bunch more N/A goodness i haven't decided on yet.

Nice setup, just one question...why go for GC w/ Koni? Why not go with JIC or Tein or something of that sort?

Because the koni yellow/GC combo is cheaper :rofl: And you can get custom spring rates for them too :D

I only have enough money for the springs right now, and you can't buy the springs seperate from the shocks with the Teins or JICs so i'm goin that route. I need to get tighter springs in my car before the 27-28th of September, goin to Watkins Glen :rockon:

K20A2 w/ hasport mounts
6 speed tranny
GReddy Evo exhaust
K and N drop in in OEM airbox
RSX axles, 5 lug, RSX brakes
RSX OEM wheels powdercoated white (on OEM michelins, i have OEM wheels with 205/55/16 azenis kickin around too)
dropped on eibach prokit for RSX (-1.0F/-1.4R) with konis (i think civic konis)
rear camber kit (dunno what brand)
progress front and rear sways with grey's upgraded endlinks
tsunami front
z3 fenders
cleared front headlights with HID's taken from Acura TL (4100k) modded into an H4 bulb
oh, and an ALARM!

i really want hondata, but can't afford any car downtime right now. plus i hear the ecu is a bitch to get out. of course i'd REALLY like the toda kit, but we can't have everything...

y b/c those are JDM? I swear...this "JDM MOVEMENT" is seriously getting on my nerves....I personally go with work works and I get the best product for the best product...sorry not going out my way to make my car a JDM whore :flush:

maybe because JIC and tein make full coilovers? and those would be a superior product to spring/shock combo?

More adjustablity. Tein SS - 16 way dampering

The Konis have all the adjustment i need so i'm gonna get them, i can't justify spending that much money on a set of coilovers.

There is a reason they are more expensive. More adjustability and they work better. Not everything has to do with the "JDM craze" I

werd....I have a life too lol...sorry guys...back on topic

Here is mine for now:

EXTERIOR:
*Custom 350z Black paint job (Car in paint shop...Changing color again)
*4-piece OEM carbon fiber lip
*OEM fenders with DC5 side markers
*VIS Invader style carbon fiber hood
*DIY Ferio style cleared headlights
*Custom stainless steel 3” piping
*Tanabe Tuner Medallion 3.14” inlet exhaust

INTERIOR:
*Custom interior
*Sparco Torino racing seats (x2) (Bride seats sitting in closet ready to replce)
*Sparco 4-point harness (x2)
*Sparco pedals
*Custom rear seat upholstered
*Carbon fiber bezel
*DC5 shift knob and boot
*Custom glove box
*PS 2
*5.4" Mobile T.V.

Electronics:
*Blitz DC II Turbo timer
*Blitz SBC-ID Boost Controller
*Blitz Power Meter ID
*Fuel Management System
*Engine Management System

WHEELS AND SUSPENSION:
*Dunlop SP Sport FM901 215/40ZR-17
*SA-90 Weds Sport Racing Rims imported from Japan (Bronze, 5-lug)
*RSX 5-lug conversion
*Wilwood 12.19” big brake kit (x2 front only)
-Steel braided flexlines
-PolyMatrix 7112 "Q" compound brake pads
*Koni Yellow adjustable sports dampers (x4) (Changing to coils)
*Eibach Sport Line springs (x4) (Changing to coils)
*SPC camber kit (x4)
*RSX Type-S control arms
*RSX Type-S Sway bars
*Black Kyokugen JDM lug nuts (20 piece lockable; 1 key)

ENGINE BAY ACCESSORIES:
*DC5 Red valve cover
*Spoon Carbon Fiber Kevlar plug cover
*DC5 Manifold Cover
*DC5 dip stick

ENGINE MODIFICATIONS:
*2002 RSX Type-S K20A2 engine swap
-6-speed transmission, ECU, air conditioning, power steering, cruise control, and sub frame (Full RSX Type-S engine conversion)
*2002 SI radiator
*Two 10" Flex-a-lite low-profile dual electric fans
*HASPORT aluminum drag mounts with polyurethane bushings
*Custom turbo kit
- Custom Intercooler piping
- Custom Intercooler
-Garrett T3 modified with 60 housing
-Custom V4-1 Tubular Manifold
-3” downpipe
-Greddy Type S blow-off valve

Other Stuff:
*Blitz Fuel Pump
*Optima yellow top battery (relocated to trunk)

Near Future mods:
*Changing Sparco 4-point harness to Takatas
*Cusco titanium strut bars front and rear
*K-pro
*Turbo Set up is changing again....

I think thats it...

Hawk are you going all out N/A?

for me it's the only way to go :)

Can i perform k20a2 swap in a 2004 acura 1.7 El (canadian car) like a four door civic.

Thancks!

i don't know your level of expertise, or what kind of tools you have access to...

j/k, but yeah the EL is a rebadged and tweeked civic. same chassis, it would work. i don't know of an EL with a swap, you could be pretty unique

did you do your dyno? what numbers are you those with the k20a3 putting up?

I havent gotten the car back from the shop yet, Its only been there about 2 weeks and when i had it towed to them they told me it would be about three weeks before they could get to it, plus i need some more time to save up some more money.

Pray tell, where'd you guys find k20A2 engines and how much did they cost? I'm thinking of doing a swap but heard its next to impossible to find a decent Type S engine. Thanks.

mine came from a person that decided to back the car into a pole at about 60mph? It only had 4,058 miles on it. The guy i got it from got it from a auto auction, just look around junkyards and ebay even maybe, your bound to find a good one eventually.

K20A2 Complete Motor & 6-speed Transmission Swap
Full Race Stage 3 Axles
Full Race Motor Mounts
Cybernations Stage 2 Turbo Kit
Consists of:
T3/T4, 60-1 or 62-1 Turbo
Custom Manifold
Custom Turbo Piping
Turbonetics Wastegate
Apexi S-AFC II
Spearco Intercooler
Custom Intercooler Piping
TurboXS Blow-off Valve
550cc Injectors
Vortech FMU
Wiseco Pistons
Eagle Rods
250psi Fuel/Oil Lines
Autometer Ultra-Lite Boost and Air/Fuel Gauges
Cybernations Black Magic II ELF
Exedy Stage 3 Hyper Single Clutch
17” Volk Racing LE28 Wheels
Quaife LSD
Carbon Fiber Engine Cover
AEM Fuel Rail
Sparco Carbon Fiber Pedals
Sparco Racing Seats
Greddy Evolution Cat-Back
Apexi Turbo Timer
Autometer Ultra-Lite Fuel Pressure Gauge
Cometic Head Gasket
VIS Carbon Fiber Trunk
VIS Carbon Fiber Hood
VIS Carbon Fiber Front Lip
Wilwood Big Brake Kit w/ Stainless Brake Lines
Hella HID Kit
TYC Black Projections
Tein Coilovers
DC Sports Lower Tie Down
OEM Style Body Kit
Carbon Fiber Dash Kit
JDM Shift Knob and Boot
Nitrous Express Wet Kit

check my car out....... www.cprace.com and then click on project cars

Wow, very nice set-up, where do you live? Are you going to be comeing to Atlanta for nopi nats next weekend?

I feel kinda inadequate going afterJDMsicvic.

Motor will be here on thursday.

k20a2 with 6 speed tranny
dc sports header
bomz underdrive pulley
aem true power pulleys
k&n sri
magna-flow may be hooking me up with a custom exhaust or
i'll have the same guy do my exhaust again (custom)

rsx type-s 5 lug conversion with calipers
brembo drilled/slotted rotors
canadia rsx type-s rims
tenzo-r coilovers

coming soon:
axles
radiator and fans
tires
vafc II
hasport mounts
and install-kinda important

i have a long way to go but hopefully within the month ill be driving



Anotherslo1 where you at in so. cal

Well, It's as follows:
OEM Stuff:
K20A w/ Y2M3 transmission
RSX-S OEM motor mounts
RSX-S radiator
RSX-S Fans
RSX-S overflow
A/C, P/S still intact
DC5-R axles
DC5-R Aluminum A arms
DC5-R hubs and knuckles
DC5-R 5 lug conversion (Brembos)

Aftermarket:
Injen SRI w/ heatshield
TODA Racing race header
DC Sports TCS
Hondata IMG
Hondata K20A reflash
Caspers O2 sim
Exedy Cerametallic Clutch
Exedy Flywheel
ES Motor Mount inserts

Suspension:
TODA Fightex DA's
AutoPower Race roll bar
DC Sports Front upper strut tower bar
DC Sports Rear lower tie bar
Volk TE-37's 17x7.5

haha...i live in Charlotte, NC...and yes i will be attending nopi in GA.

ok heres what I got.

k20A2swap
hasport motor mounts
Cusco 1.5 way LSD
ACT clutch and lightweight flywheel
Greddy turbo kit
Greddy intercooler
Blitz SS blow off valve
greddy turbo timer
profece-01 boost controller
optima yellow top import battery
custom high flow ground kit
random tech high flow cat(custom)
Tenabe hyper medallion exhaust
Tein SS coilovers
Konig imagine 17's
Toyo proxes t1-s
Sparco steering wheel
Sparco torino seat (1 for now $$$ priorities)
Alpine head unit
JL audio mids and highs (powered by JL 300x4)
JL w-7 12" (powered by rockford fosgate punch 1000-A comp. sereies{1300rms})

COMING SOON!!!
WEISCO 10.5/1 forged pistons
Crower rods
Zex 75shot wet kit(off my d17 before swap)
other sparco torino seat :_doh:
VIS octane body kit(been sitting in my garage since last christmas)


that'll do :D

damn.... ballers...

Seriously

oh add brakes to my list
http://www.we-todd-did-racing.com/we...MXk1NDE%3D.jpg