K20a2 Swap!!!! :rockon: Ok yall i finally got $4,500 saved up and i was wanting to put a SF turbo in my car but i thoguht, what the hell. I want a K20, so i need some help on finding one for about $4,000 so if anyone has some places to find a good price lemme know b/c i am ready todo the deed finally!!!!! |
good luck doing the swap for 4500 man. it will be more than that. you should just go turbo. |
$4500 won't be enough for a swap i'm currently doing a K20a2 swap, but it's getting much much expensive, i got the engine for $3500, but the rest of the small parts all cost alot, such as the hasport engine mounts ($650), hondata ecu flash ($700) and etc. trust me it's gonna be over more than $4500 after you finish the swap |
he's right. your gonna spend alot. go turbo |
turbo then 50 shot |
ya 4.5 grand is a little low i talked to a shop by me and they said 8k for the rsx type s swap but for me its worth it but to others its not |
ok well my uncle owns his own shop so installing it doesn't cost anything but the only thing he can't get is the motor itself, the other things i am not worried about, i can get them all at wholesale |
yea i dont care how whole sale u get.. engine is gonna be 3500 atleast... 650 for mounts... You AINT getting a discount for them and normal price for the rest of the parts.... throttle cable, shift linkages, subframe, radiator, custom AC lines, Custom Fuel lines, ETC, ETC......... your 4500 spending limit just shot to 7k |
well i will make sure and post all ther receipts after i buy everything |
the only thing i wanna know is where to buy the damn motor at, NOTHING ELSE |
lmao.. EBAY.COM FOOOL |
|
Sit tight and save your cash. As of right now, you WILL need a little more than $4500. How much more depends on the deals you get. You need an entire shopping list of parts. Come up with this list first. Then make a price list. Then with this total specific price in mind, you can save the remainder of the money. At this point begin your shopping with the small stuff first and the motor LAST. The prices on the type-s motor are falling more and more everyday. In just the last six months it has fallen thousands of dollars. So, if it takes a while to get all of the stuff together and the motor is last you will get it for the best price. You would really hate it if you bought the motor today for roughly $4000 and before it's even installed you start seeing better prices on it. That's the way I'd do it, good luck. ;) |
damn, i work at a fabrication shop.... I will make my own motor mounts, make my own k-member, make all my own damn stuff. And i bet you it would still cost me over $4500. I would LOVE the K20 swap (cuz i would turbo it), but i just dont have the $$$. Just go Stage II turbo and blow the K20A's away |
I got my manual tranny act clutch & flywheel wiring harness, ecu, master shift cylinder, shift linkage, shifter assembly, pedal assembly, all for under $1500, which I think is pretty good im going turbo so yeah, im getting rid of my auto :) going to a shop in long beach that will charge like 300 for labor. My tranny is about to go anyways so why not :) btw its a 6 puck clutch what the hell is that, the guy just told me its a good one. |
a 6 puck clutch means that it is more like an "on-off" switch. I had an ACT flywheel, xtreme pressure plate, and 6 puck clutch, and it chattered, banged, and wasnt very streetable (even though i put about 10,000 miles on it). If it is a Sprung 6 puck (meaning that it has springs in it) it will be a nice, streetable clutch. But it will still chatter. |
what do you mean chatter? you mean it wont be smooth and you can hear the clutch? |
on my friends civic I dont know what clutch he has but it sounds like brake rotors lmao, i repeatedly tell him he needs to change his brakes, because I dont know anything about manual trannsmissions. LMAO and he told me thats his clutch. |
Well how do i go about getting a "shopping list for everything i need, like how do i know exactly what i will need and what i won't need??? |
Originally posted by mad03civic Well how do i go about getting a "shopping list for everything i need, like how do i know exactly what i will need and what i won't need??? |
I believe that there is a DIY for the K20 install. And clutch chatter sounds like banging and feels like it grabs, then grabbs again, then grabbs again. |
Originally posted by Catalyst I believe that there is a DIY for the K20 install. And clutch chatter sounds like banging and feels like it grabs, then grabbs again, then grabbs again. It sounds like banging? really that must be a real head turner when you drive by groups of people ;) |
banging is more what it feels like. |
i might be selling my swapped car. I got wrecked last night by a drunk driver. Had it runnin for about 4 weeks too. I would be selling th car with everything though...probably around 10 grand for everything. Thats working motor, all the little stuff you need, tranny, wire harness modification done, CAI, rims, headlights, short shifter, grill, TEINs everything. the rear end was hit hard, so the motor is still cherry. Still not sure if thats what im gonna do, but i might be...something to think about. |
Damn that sucks that you got rear ended. At least the motor is still good. :( |
Originally posted by Catalyst damn, i work at a fabrication shop.... I will make my own motor mounts, make my own k-member, make all my own damn stuff. And i bet you it would still cost me over $4500. |
yea i seen a swap done for $3000. u just need get hookup with the engine. |
definately not a K20 swap for 3000 |
Originally posted by Crash2002 definately not a K20 swap for 3000 |
Elite, if you don't mind, would you tell me where you got all the parts for your Tranny Swap, I'm looking to do one and your price range sounds about the kinda territory im in.. I wanted to know if you could hook me up with a list of parts.. Thanks man, If you want IM me on aol or yahoo : MightyMouse585 and we can talk there or PM me, or just make a thing here. Thanks again, RiceRocketeer |
All times are GMT -5. The time now is 06:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands